Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi Guys,
If i don't choose a tool in the toolpath operation, Mastercam has a default tool for each operation, how and where I can change that tool. I did created those tools at some stage eight -nine years ago, but could not work it out now.
Regards
Monty
Thanks Aaron, I tried to get in the File - options but for some reason it does not let me get into nc shell, It opens in the window with information "Define preferences for working with nc files"
Do I have to enable editing or something.
Regards,
Hi Guys,
For our Bemato mills with xxxxOR controller I can create a nc code with .pim extension. If I modify the file in code expert it does not allow to save as .pim file. I can only save it as text file. It also does not have NC options like next tools, colors etc. We had similar problem with Mastercam editors in earlier versions til X6 and had to add .pim added to file extensions in control definition for it to be recognised by the editor. It is not working for X8. How can I add *.pim to the 11 file types(nc, ncf, min, mpf, iso etc) recognised by the editor in " save as type" area. I have nc file extension set to .PIM in control definition, In nc configuration file extension is also set to .pim;
Also why is my control name replaced by xxxx automatically.
Regards,
Hi Guys, Do I need to install MU1 before I can install MU2 or can go straight from X6. Also any issues with MU2, should I stay with X6 or stop ay MU1.
Regards, Monty
Hi Guys,
Whenever I try to edit machine defination in X3 I get a message,
(System configeration,
Switching system units from metric to English,
Loading english configration file.)
As far as I could remember I used to get this massage in X, and was fixed when I loaded SP1,
Any suggestions.
Kindest Regards
Hi Guys,
Could someone zip and mail to me the file. I am having trouble reloading the samples.I only loaded metric samples when I installed the mastercam as I only use metric.
Kindest regards,
Monty
Hi Guys,
In lot of posts members talk about benchmark performance of different hardware, are there any perticular files available on ftp/online they refer to when comparing performances.
Kindest regards
Monty
The post I am modifying is a generic fanuc post. and is been used since mill9. It is been fine tuned for xxxxor except for rotary.
Actual inhouse xxxxor post given by reseller does not work for me at all. I am not sure which post has been forwarded to inhouse solutions as reseller has both of my posts.
Kindest regards
Hi John,
I am trying 4th axis on Bemato milling machine with xxxxor 8055 control and tanshing rotary axis.
We use this machine to make prototype out of foam or machinable polyurethane.
On this limit for 4th axis is between -359.999 and 359.999.
There is no M code for cw or ccw, and direction of rotation comes from Sign, eg; A90 and A-90 on the machine are same point except axis will go cw to A90 or ccw to A90 if sign is A-.
I have modified a post that is doing my job to some extent.
I created a Helix on x axis and did a 3d contour toolpath.
Output is something like this (first few lines)
N260G1Z30.F600.
N270X.064Z29.989A1.907F2000.
N280X.115Z29.984A3.454
N290X.167Z30.A5.
N300X.236Z29.981A7.077
N310X.305Z30.001A9.154
N320X.333Z30.A10.
N330X.41Z29.976A12.289
N340X.486Z30.A14.576
N350X.5A15.
N360X.577Z29.975A17.316
N370X.654Z30.A19.634
N380X.667A20.
N390X.745Z29.975A22.343
N400X.823Z30.A24.688
N410X.833A25.
N420X.911Z29.975A27.336
N430X.989Z30.A29.674
N440X1.A30.
N450X1.078Z29.975A32.339
N460X1.156Z30.A34.677
N470X1.167A35.
N480X1.245Z29.975A37.339
It works fine except I have a odd A360.
If I mirror the spiral on Xaxis and post again.
output is like this.
N260G1Z30.F600.
N270X.064Z29.989A358.093F2000.
N280X.115Z29.984A356.546
N290X.167Z30.A355.
N300X.236Z29.981A352.923
N310X.305Z30.001A350.846
N320X.333Z30.A350.
N330X.41Z29.976A347.711
N340X.486Z30.A345.424
N350X.5A345.
N360X.577Z29.975A342.684
N370X.654Z30.A340.366
N380X.667A340.
N390X.745Z29.975A337.657
N400X.823Z30.A335.312
In this for every 2deg in nc code rotary tries to go 362 deg.
This code works fine if I replace all A with A- and replace odd 360 with 359.999.
How can I limit 4th axis between -359.999 and 359.999.
How can I get A- for cw rotation.
How does ctol in post works as our mastercam reseller told me we get some weird output with ctol 360 although I am getting it right.
Our reseller has forwarded my post to inhouse solutions for modification and I am waiting for reply as he is not sure how long it will take I am trying to modify a little myself to get out of trouble.
Thanks Colin,
I have figured out that by changing sign for A (+) or (-) I can go CW and CCW or on that machine A90. and A-90. is same except for direction. For A90 rotary will travel ccw 90deg or for A-90 rotary will travel 270deg cw and will still end up at absolute 90deg.
Next question is how can I fix this in post.
Kindest regards
Hi Guys,
We have a Bemato milling machine with xxxxor 8055 control and tanshing rotary axis.
Does anyone knows code to go ccw for the rotary.
M21, M22 not working.
Thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.