Mr. 5Axis C.G. Can you paste that custom drill cycle for us?

why when I define a tap feed and speed one will change the value of the other?

help im having the same trouble: two ops, one tool, M00 after 1st op w/ force tool change i need a tool change in the first op (force tool change didnt work in first op) % (PROGRAM NAME - 2701 ) (DATE=DD-MM-YY - 29-06-12 TIME=HH:MM - 07:54 ) N100 G0 G17 G40 G49 G80 G90 ( 1 CHAMFER MILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA. - 1. ) G0 G90 G54 X12.52 Y-3.06 S9000 M3 G43 H2 Z.5 M8 Z.1 G1 Z-.28 F30. G41 D2 X10.02 F80. G0 Z.5 X10.4013 Y.06 Z.1 G1 Z-.28 F30. X14.1513 F80. G0 Z.5 X22.21 Y0. Z.1 G1 Z-.25 F30. Y-3. F80. G0 Z.5 X-.06 Z.1 G1 Z-.25 F30. Y0. F80. G0 Z.5 G40 M5 G91 G28 Z0. M9 G28 X0. Y0. M01 ( 1 CHAMFER MILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA. - 1. ) N110 ( FLIP ) G0 G17 G40 G49 G80 G90 G91 G28 Z0. G28 X0. Y0. T2 T0 M6 G0 G90 G54 X14.1513 Y-3.06 S9000 M3 G43 H2 Z.5 M8 Z.1 G1 Z-.28 F30. G41 D2 X10.4013 F80. G0 Z.5 X10.02 Y.06 Z.1 G1 Z-.28 F30. X12.52 F80. G0 Z.5 X22.21 Y0. Z.1 G1 Z-.25 F30. Y-3. F80. G0 Z.5 G40 M5 G91 G28 Z0. M9 G28 X0. Y0. M30 % *********************portion of post. see any reason y Start of File and Toolchange Setup # -------------------------------------------------------------------------- psof0$ #Start of file for tool zero psof$ psof$ #Start of file for non-zero tool number pcuttype toolchng = one if ntools$ = one, [ #skip single tool outputs, stagetool must be on stagetool = m_one !next_tool$ ] "%", e$ "(PROGRAM NAME - ", sprogname$, ")", e$ "(DATE=DD-MM-YY - ", date$, " TIME=HH:MM - ", time$, ")", e$ pbld, n$, *sgcode, *sgplane, "G40", "G49", "G80", *sgabsinc, e$ sav_absinc = absinc$ if mi1$ <= one, #Work coordinate system [ absinc$ = one , sgabsinc, *sg28ref, "Z0.", e$ , *sg28ref, "X0.", "Y0.", e$ absinc$ = sav_absinc ] pcom_moveb c_mmlt$ #Multiple tool subprogram call ptoolcomment comment$ pcan if stagetool >= zero, pbld, *t$, "T0 M6", e$ pindex if mi1$ > one, absinc$ = zero pcan1, pbld, *sgcode, *sgabsinc, pwcs, pfxout, pfyout, pfcout, *speed, *spindle, pgear, strcantext, e$ pbld, "G43", *tlngno$, pfzout, scoolant, next_tool$, e$ absinc$ = sav_absinc pcom_movea toolchng = zero c_msng$ #Single tool subprogram call ptlchg0$ #Call from NCI null tool change (tool number repeats) pcuttype pcom_moveb c_mmlt$ #Multiple tool subprogram call if counter <> 1, [ pbld, comment$ #"G43", "H27", pfzout, "M08", e$ ] counter = 0 comment$ pcan result = newfs(15, feed) #Reset the output format for 'feed' pbld, sgplane, e$ pspindchng pbld, scoolant, e$ if mi1$ > one & workofs$ <> prv_workofs$, [ sav_absinc = absinc$ absinc$ = zero pbld, sgabsinc, pwcs, pfxout, pfyout, pfzout, pfcout, e$ pe_inc_calc ps_inc_calc absinc$ = sav_absinc ] if cuttype = zero, ppos_cax_lin if gcode$ = one, plinout else, prapidout pcom_movea c_msng$ #Single tool subprogram call ptlchg$ #Tool change pcuttype toolchng = one if mi1$ = one, #Work coordinate system [ pfbld, *sg28ref,"X0.","Y0.", e$ pfbld, "G92", *xh$, *yh$, *zh$, e$ ] pbld, "M01", e$ pcom_moveb c_mmlt$ #Multiple tool subprogram call ptoolcomment pbld, n$, comment$ pbld, *sgcode, *sgplane, "G40", "G49", "G80", *sgabsinc, e$ "G91 G28 Z0.",e$ "G28 X0. Y0.",e$ pcan result = newfs(15, feed) #Reset the output format for 'feed' pbld, *t$, "T0 M6", e$ pindex sav_absinc = absinc$ if mi1$ > one, absinc$ = zero pcan1, pbld, *sgcode, *sgabsinc, pwcs, pfxout, pfyout, pfcout, *speed, *spindle, pgear, strcantext, e$ pbld, "G43", *tlngno$, pfzout, scoolant, next_tool$, e$ absinc$ = sav_absinc pcom_movea toolchng = zero c_msng$ #Single tool subprogram call pretract #End of tool path, toolchange sav_absinc = absinc$ absinc$ = one sav_coolant = coolant$ coolant$ = zero #cc_pos is reset in the toolchange here cc_pos$ = zero gcode$ = zero pbld, sccomp, *sm05, psub_end_mny, e$ pbld, sgabsinc, sgcode, *sg28ref, "Z0.", scoolant, e$ pbld, *sg28ref, "X0." ,"Y0.", protretinc, e$ absinc$ = sav_absinc coolant$ = sav_coolant pretracteof sav_absinc = absinc$ absinc$ = one sav_coolant = coolant$ coolant$ = zero #cc_pos is reset in the toolchange here cc_pos$ = zero gcode$ = zero pbld, sccomp, *sm05, psub_end_mny, e$ pbld, sgabsinc, sgcode, *sg28ref, "Z0.", scoolant, e$ pbld, *sg28ref,"X0.", "Y0.", protretinc, e$ absinc$ = sav_absinc coolant$ = sav_coolant protretinc #Reset the C axis revolution counter if frc_cinit & rot_on_x, [ rev = zero sav_rev = zero cabs = zero csav = zero indx_out = zero if index, e$, pindxcalc, pindex else, *cabs prvcabs = zero !csav, !cabs ]

1st timer nathan with goddard: im using the v9 centroid post with a few tweks thought i need to post multi,, wcs the book says i need to use the ( E1, E2 ect ) for my g54 g54 ect. i do not know where to put them to send a sample for post editing can i get a hand thanks nathan