Lightning Larry
-
Posts
22 -
Joined
-
Last visited
Lightning Larry's Achievements
-
I would say OT can go and try to keep 2 or 3 years worth of the rest due to the fact that alot of my questions have been answered by simply searching old threads.
-
Hey, Thanks I had the same problem exept it was xatp.dll that was causing my problem.
-
Sorry, forgot to chang my profile to x2 mr2 wich is what I'm running now.
-
No problems so far here. Posting to a makino mill.
-
I have had this in the past but came to find flaws in the surface geometry. In my case it did show up in verify.
-
I'd have to agree with Matt If the files are coming from Pro E use .stp. I have always had problems with Pro E files in Mcam.
-
________________________________________________ "Why is there never enough time to make it right, But, always enough time to make it over?" _________________________________________________ Very good question I've been wondering that for years!
-
Believe it or not HSM is alot easier on your spindle too. I have done repeat jobs both ways and the end result is that HSM costs about 30% less than conventional methods.
-
In your display control set your step to 1000 and your refresh to 10000!
-
Could the problem possibly be in your post?
-
Thank you all for your help it is much appreciated!
-
Makino pro 3 control!
-
Right on!
-
Trying to translate to specific positions on a single part!
-
Yes! What Doyleg said!