shredder
-
Posts
72 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by shredder
-
thank you FNMI:)
-
I am using a TOS_WHN13CNCTNC530 post processor
-
thank you for your response! I dont seen to have a toolchange section in my post?
-
Hiya peeps:) I Was wondering if anyone knows how i could add a m51 to my misc values on a hiedenhain 530 post processor,m51 just basically unlocks the axises much like g64. thanks:)
-
CIMCO DNC-Max Cycle Start and Cycle Stop Monitoring
shredder replied to shredder's topic in Post Processor Development Forum
thanks:) -
CIMCO DNC-Max Cycle Start and Cycle Stop Monitoring Im a little confused to where to put the macro at the begining and end in a heidahain post! any help appreciated thanks
-
Thanks guys I will try some different toolpaths
-
Its a form on a casting which has .5 extra on it
-
I wanna raise the tool to start cutting higher!!!
-
yeah it is a drill cycle,Would just like to know how to add it to my post!!!
-
cunder Im not sure i follow ya,Wouldnt that still cut @top of stock
-
Justin Iam using a surface rough contour
-
I set my 19.5 to 20.,and it started [email protected]!
-
On my machine to end the cycle it is stop m05. right now my post just does the m05. Also would like to know about my helix cycle!!! thanks:)
-
But that doesnt work,Say my top of stock is 25.3 and I was to add .5 and type in25.8 the 3-d still starts [email protected] dont want to do copy toolpaths like leaves .4,.3,.2 .1 etc,Theres gotta be a way to do .5 .4 .3 .2 .1 .03.008 in 1 op. and also I dont wanna use stl because these parts and files are huge!!!
-
Isnt this the same as editing them in the parameters tab?
-
No tnc has a actual stop code
-
Now for a few new q,s lol How can I put a stop in my post right now it just puts a mo5. Also would like to add my machines helix cycle 207 to it:) thanks again
-
I should note I am using mx4 mu1
-
hello all Was wondering if there was a way to adjust the stock in 3-d without multiple copying of ops,Say I have a part that supposed to be 4 inches thick and its actually 4.5 thick? thanks for you time!
-
thanks so much
-
Hi peeps I have modded a tnc530 post processor and its almost ready to use,But theres 1 little problem.When I do a drill or tap ,it puts the xy postion on the first line then after the drill cycle it calls the same position up with a m99,Meaning it would do the hole twice.Anyone know what I need to change? Im using mx3mu1. thanks in advance and gr8 forum:)