Looks like you need to set your origin in your Toolplane and Comp/construction planes to zeroes in your operation.

Carbide or Cobalt? Which is better or should I be using HSS?

Anyone have experience drilling .04 or .070" dia. holes .15" deep in Tantalum?

You can use create line endpoint. Then select the tangent button on the ribbon bar and select the arcs near where you want the line.

Also hold Shift while selecting beginning of chain and desired end of chain for a quick partial chain selection.

Mark, I see it now.. it only shows when I set some type of tool comp in control. I haven't had any issues because I always use computer.

What 5 axis tool path are you using? I don't see anything for " diameter for simulation"

Is "Cutter comp in control" box checked in your Configuration; "Verify Interface; Verify Settings"?

When you make a change to the number of passes to a projected contour the projected toolpath does not get a red X. and its not regened unless you make sure to do it. You must regen it even though it doesn't show as dirty..

Class of tap should be H1 for a 3b Thread

Windows 7? Performance setitings the last item "Visual styles on windows and buttons" must be enabled.

Windows 7 64 running fine here on 9 boxes. All I5's with Quadro video

It's now under "Edit", "Simplify"

Ahh found it! somehow the chook path waws pointing the C:MCamX4 and not C:MCAMX4CHOOKS like its supposed to.

The dialog comes up, but when I choose a type of toolpath nothing happpens... also when I open an existing file When I regen I get "Warning error Regenerating Operation! 5-Axis Multi Surface" and I cannot open the parameters.. the log file says "App=MW5AXMSURF Entry=m_main" and then "Unable to acess operation's dll"C:MCAMX4APPSYOURPRMFUNCTIOM.DLL" "Exiting App=MW5AXMSURF.DLL"