Louis LePoris MLC-CAD
-
Posts
25 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Louis LePoris MLC-CAD
-
I would try 1:1 ratio and double checking tolerances. Then after inspecting your toolpath you may want to turn off/on the new arc filter in your control panel applet to further manipulate this behavior.
-
Feature based machining - FBM mill/drill create 2d/3d toolpaths off of the solid w/out creating new geometry ~ also solid chaining..
-
control-alt-delete then click the running processes tab to find it.
-
Turnaround jobs in lathe
Louis LePoris MLC-CAD replied to JPensack Acker Drill's topic in Industrial Forum
specify margins in your stock definition and use "stock flip" in the misc ops menu is one solution. -
This to me is like Russian roulette. back up to network but if it causes MC to run keep it local (posts,config,machine defs etc). Is your network that bullet proof? I would even go so far as saving mcx files on network and backup (autosave setting) local at the worst. I just don't trust any network to not go down in the middle of a job!
-
check it.. Pablo Huffaker (Grave Digger Monster Truck Driver and owner) 2007 Monster Jam World Finals Freestyle Champion, Mastercam user and MLC Customer will be in our booth on WED-FEB-25 to sign autographs and give away posters. it won't even be a Sunday! Sunday!
-
Gabe going to be there?
-
Anyone? HOUSTEX George R. Brown Convention Center
-
OS question / Cat@NT
Louis LePoris MLC-CAD replied to Louis LePoris MLC-CAD's topic in Industrial Forum
I don't think MC likes it for some reason. I'm trying to find out what settings if any are availabe to combat the intermittant crashes since loading it. -
Has anyone had any experience with this?
-
quote: Yeah..having them as a side by side has been an issue for some on hereMake sure all your migrated settings are linked to X3 and not X2 still. Bob - the CRC error you mentioned can be affected by the control definition in cutter compensation settings. See - Allow cutter compensation in control to be activated in arcs.
-
I'm looking for a vista solution to this if anyone knows of one. good for XP /shareware/ tia, Louis
-
Turning with solids
Louis LePoris MLC-CAD replied to JPensack Acker Drill's topic in Industrial Forum
another idea... *right side plane, create line from origin, ending at any angle to capture max cross section of part and then project /move/ to the solid /surface selection/. -
WHY do you need the history?