Joe, If you are interested in using a permanent placement contingency based firm please let me know. I'm sure I can help you. Regards, Brian Cerkas TRI

Brad, I have a company in the Chicago area always looking for a strong Tig Welder. Please have your colleague contact me at [email protected] with their resume. Regards, Brian Cerkas Technical Resources Inc. 630-995-4100 ext 211

Hi Buck, Please let me know if I can be of any assistance. I am a technical recruiter in the CNC machining industry. I do permanent placement of CNC Engineers all the way to CNC operators. I'm specific to the industry. Regards, Brian Cerkas [email protected] Technical Resources, Inc. 3030 Warrenville Road Suite 315 Lisle, IL 60532 Ph: 630-995-4100 Ext 211 Fax 630-995-4107 Toll Free 866-419-6995 www.techrecruiting.com

I have a company in the Philadelphia area looking for a CNC Programmer with CNC Swiss Programming experience. Preferably Citizen Swiss. Mastercam X2 or newer offline programming and hand G-code programming on Mitsubishi Windows controls as well. Setup from blueprint, troubleshoot, live tooling, selection of tooling, Mill/Turn operations on Multi Axis Citizens up to 9 axis. Medical, or Aerospace experience is a plus. Hands on approach with both offline Mastercam as well as hand G-code programming and setup. Mentoring operators and machinists in a lead Programmer position. Relocation assistance, Benefits in 60 days. 401K after 1 year. Pay is $25 to $35 per hour on 1st shift with about 8 hours of OT per week. Please send resumes to [email protected] or let me know if you have questions. Regards, Brian Cerkas Technical Resources Inc.

Gentlemen, I have a client in the far suburban Philadelphia, PA area looking for a CNC Programmer with Mastercam X or newer programming 5 axis VMC mills. Relocation assistance is available for this position. Medical industry parts. Tolerances +-.0002 are bread and butter. Hands on approach willing to do setups, programming offline and troubleshoot at the control. Strong tooling knowledge, feeds and speeds, time studies, GD&T. Machining of Stainless Steel, Titanium, and others. Benefits at 90 days. 401K after 1 year. Pay is $25 to $35 per hour. Typical week is 1st shift with 8 hours OT per week. This is an expansion position with a growing company. 260 people in company, with 20 people in the department. Please send your resume or contact me at [email protected] with any questions. Regards, Brian Cerkas Technical Resources Inc.

I thought JB stood for JOB. Sorry.

aaah! I see. Still learning.

Sorry Keith, I need to place them and get paid, then I deliver the Lobster, and Steak. Thanks, Brian

Yes, San Diego area. North side around Vista, CA

If anyone knows someone that would be good for this and can give someone a leg up let me know. Steak and Lobster dinner for two is on me if I place someone you refer to me.

Someone who is an up and comer that is polished and good skills would work.

Randle, No it is not in Poway.

That's what the client gave me for parameters.

Gentlemen: Looking for a 2nd shift supervisor for a Job Shop in the San Diego, CA area. This is a new position to develop a 2nd shift for this facility. This person should have 5 years experience minimum of programming and setup from blueprint with G-code programming at the control. 1-2 people operators will be under them for starters. Hands on position running machines, G-code programming, setup, troubleshooting, mentoring, operating 5 Axis Haas and Mori Mill/Turns. Needs to be independent and responsible. Mastercam X4 is used for the 5 axis programming and fixture design. This is a long term position to develop and maintain the 2nd shift department. 90 days HMO/ PPO 1 year 401K. 6-8 hours of OT per week with M-Thursday 4:30PM to 2:30AM. Probably a $2.00 shift premium. Which is negotiable. $25 to $30 per hour for the right person. Email me at [email protected] with any questions. Thanks, Brian Cerkas Technical Resources Inc.

Gentlemen, I'm looking for the following. $70K to $75K direct hire for a Manufacturing Engineer with strong Casting and Forged parts precision machining experience. It's not Mastercam Programming but if you are interested please let me know. Manufacturing Engineer with 7 to 10 years experience machining large Cast and Forged parts, but not out a Casting or Forging Foundry. Must have good experience designing fixtures from Autocad on large 3-4 Axis HMC, VMC and large lathes. Good understanding of processing a part (casting prefer) from blueprint, GD&T, selection of tooling, and tooling design. Creating CNC Program, tool sheets, routing, setup sheet. Floor support. Lean Mfg plus, T-shooting and customer communication a plus. Knowledge of Carbide Indexable tools is a must. Knowledge of Smartcam or Geopath, Pro-E Solid Model a plus. Looking for 1 year. Those that they have seen lacked experience designing fixtures for large Cast or Forged Parts out of a machining "Not" foundry environment. Can start ASAP. Will relocate for right candidate. 30 days for benefits, Health, Dental. 401K after 1 year match 50% of first 5%. Thanks, Brian Cerkas Technical Resources Inc. [email protected]

Does anyone know of any good machinists that could use a leg up for these positions? This would be a great opportunity for someone that wants to move up in a company and in a year or two get trained and schooled on Mastercam. This employer invests in it's people. I've placed 12 plus people here and I know them very well. Thanks, Brian Cerkas

Gentlemen: I have a spot opening for a Manufacturing/ Process Engineer spot within 60 miles of Birmingham, AL. The pay is between $60K and $90K DOE. Looking for someone with very strong Mastercam X2 or newer, Solidworks 3D Design, Solid Surfacing and Solid Modeling. Strong Setup and Tooling Knowledge. Those with very strong 5 Axis VMC or HMC OR Twin Spindle/ Twin Turret/ Mill/Turn Lathe experience OR if you have both is a huge plus. Relocation assistance of 90 days furnished apartment and relocation dollars given after 90 days and proof of relocation to the area. I have personally placed over a dozen people at this company. They are looking for go getters and people that want a career move to grow and retire with their company. They are growing by 20% a year, family owned 1st and 2nd generation are involved who can not only talk the talk, but can walk the walk. State of the art facilities, air conditioned, new machines. Siemens 840D or Strong Fanuc controls are a big plus. 4 year degreed is a big plus. Please email me with any questions or if you are interested. [email protected]. Thanks, Brian Cerkas Technical Resources Inc.

Terry..Perhaps you may know someone who is up and coming that is looking for opportunities that I should be speaking with. Regards, Brian Cerkas Technical Resources Inc.

Gentlemen: Any referrals would be much appreciated for these spots. $23 to $25 per hour with relocation. Thanks, Brian Cerkas Technical Resources Inc.

Hi Tyler, Not sure what you mean. Please email me at [email protected]. Thanks,

Thanks for the props gentlemen: I posted info on 4 spots I'm looking to fill in Alabama. If you know of anyone I should be speaking with please let me know. State of the art equipment and great company to work for. I've placed over a dozen people there. Regards, Brian Cerkas

FYI. 2 of the positions are 1st shift and 2 of the positions are for 2nd shift. 1st shift runs Monday through Friday.

Gentlemen: I'm looking for 4 CNC Machinists/ Programmers for the Birmingham, Alabama area. My client is a machine shop that does Defense and Automotive machining and is well established in the area. Ideally these candidates will be able to Program G-M code on Siemens 840D or Heidenhain controls, but Strong Fanuc controls will work as well. Will need to be strong on setup and tooling selection. Those with VMC or HMC 4-5 axis for 2 of the positions and 2 positions for Twin Spindle/ Twin Turret Mill/Turn Multi Axis lathes. This company uses Mastercam X3, and is looking for people that want to move up in the company. Basic duties in the beginning would be Setup, Tool Selection, Minor Programming and Editing. These are 2nd shift positions Monday through Thursday 10 hour shifts and OT is worked on Friday. The cost of living in this area is low and this company is looking to me to find people as it's hard to find strong people with this type of background in their area. I have personally placed over a dozen people there in the last 2 years. I am the only recruiter they work with and know this company very well. They have opened a 2nd facility in the last 2 years and are growing. There are about 100 people working for them now and they are a leader in machining in the area. It's family owned 1st and 2nd generation with the 2nd generation owners having hands on and drilling holes since they were 8 years old. Clean state of the art air conditioned facilities. Pay is $20 to $25 per hour for starters. Those with exceptional experience could see more. Team leaders and Mastercam programmers there are in the $28 to $30 per hour range which is exceptional for that area. They offer 3 months furnished apartment and after 90 days of service and once you have showed that you moved to the area permanently there is a kick back in some dollars for relocation assistance. Anyone interested please let me know. You can email me at [email protected]. If you know of anyone who may be interested please pass on my information. Regards, Brian Cerkas Technical Resources, Inc. 3030 Warrenville Road Suite 315 Lisle, IL 60532 Ph: 630-995-4100 Ext 211 Fax 630-995-4107 Toll Free 866-419-6995 www.techrecruiting.com

Gentlemen: Just in case my email is [email protected]. Someone made me aware that I may have typo'd in a previous post.