Sumac Andy
-
Posts
78 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Sumac Andy
-
Hi - this is my first attempt and I am getting nowhere fast. I have put this as a request to our Mastercam support dept. and am waiting a response...... I thought I may get a quicker answer here so here goes..... I would like to machine the outside profile as the attached part shows and is orientated. I have tried a swarf but get 'must sync sharp corners'?????? There is more to this part but cannot share as confidentiality prohibits. Any help would be great. Ta. Andy. 1ST 5AXIS.MCX-6
-
Thanks, that works brilliant
-
I have just ventured into using multiple toolpath groups, and the problem I am having is this... I have 3 groups, OP1, OP2 and OP3. When I try to do a setup sheet for the individual ops I only get OP3 showing in the description block at the top of the page. I have tried re-arranging the groups so OP1 is after OP3 but still only get the information of OP3 in OP1 setup? Any one else get this? Have I missed something here? So far these setup sheets have proved a time saving and paper saving so am well pleased with the software so far. Andy.