did u got any solution for the same?

Did u get any solution to this iam in need of same

Dear Paul decelles Where does this Issue stand if it is a 5-Axis router??? Krish

did you got it fixed? does it deal with setup length? I also have similar problem i make roughing keeping .25inch stock and when i run 5axis program it runs far away almost 1inch agay each side I feel its related to pivot and setuplength problem if not can you help me out iam also in same problem regards and thanks in advance Mukundan

me having VMC 450P3 bridgeport i can make program in mastercam which give co-ordinate moer than 360 mean 361 similarly 700+ and the machine does not acept so what is the solution

see my friend iam good in solidworks mastercam unigraphics and little bit good in Pro-e and ideas i can help you if you wish

i have developed a post for agie mcam but i use mastercam mill to achieve it and not wire and ofcource i cant repeat g01 or g02 in the repeat lines any one can guide me how to bring g01 or g02 repeat in all block irrespective to either presence of same in the previous block also my post will work only in 2d and for 3 d i need a post with regards Mukundan Kris http://geocities.com/kmukundank [email protected]

dear friends can i have agie post processor for agievishion agie cut classic machine i have to edit a lot and for 4 axis i cant be able to configure also the post can any of u can guide me if you wanna help me just mail the post to [email protected] thanxs in advance with regards Mukundan Kris

did u found the post for the agie my friend

IS THE POST STILL VACANT IS ONLY THOSE WHO STAY IN US OR OPEN TO ALL IF NOT ALSO PLEASE GUIDE ME TO GET A JOB IN US AS I HAVE DONE MODELLING MACHINING OF HUMAN ARTIFICIAL HEART VALVE TO HELICOPTER TURBINE BLADES WITH REGARDS MUKUNDAN*K

Can anyone say where i can go to get job in mastercam in canada withouth being in canada