JParis please add new documentation and samples Best Regards

The latest MW documentation ModuleWorks - Documentation.chm is available for download on: For login, please use the username and password attributed to your company by MW.

First you share information in your video on youtube, then you ask questions ?

Thanks Gcode ​ , but I would like that the choice was all operations Maybe in the next versions to appear such a choice, to facilitate programming. Maybe somebody create chook <video removed>

Hello! I have a question:Is there a way to change the "first" working coordinate system all toolpath in one click ? For example, create 10 toolpath Working coordinate system Tool plane Construction plane A0 A0 A0 A10 A10 A10 A20 A20 A20 A30 A30 A30 A40 A40 A40 A50 A50 A50 A60 A60 A60 A70 A70 A70 A80 A80 A80 A90 A90 A90 Need install al Working coordinate system - A0 Working coordinate system Tool plane Construction plane A0 A0 A0 A0 A10 A10 A0 A20 A20 A0 A30 A30 A0 A40 A40 A0 A50 A50 A0 A60 A60 A0 A70 A70 A0 A80 A80 A0 A90 A90 I try do it with - Edit common parameters dialog box - planes - but all three "Working coordinate system ,Tool plane ,Construction plane" are set in A0. But if I have a hundred operations? I need to go into each and set each A0?

How can I download Mpmaster X2 with Machine Simulation ?

Thank you Ron !

Hello! How to add limits for rotary and linear axis - for multiaxis tool path in Mastercam. That it would make the Mastercam and not the postprocessorand and see it in the machine simulation limits.zip Please show an example of how to set the limits of the axis

I saw this example on one of the forums, other software - the question is how to do it in Mastercam? This toolpath created as a 2D operation and called on the curve by ≈ 1 degree. Any ideas? link on video in vericut Screw.zip

This man "Jon Banquer" always says bad about Mastercam?

group-CADCAM Technology Leaders and link youtube

5th Axis Inc. Article Jon Banquer

That's what I mean, it's written in the documentation for Fanuc But I tried it, but it works not modal.

Hello to all. Who ever tried to write a macro program as a modal G code? How to do it on Fanuc 0 ?

delete

Hello! How to output all in one project Vericut? -all groups, all toolpath, stock models, G-code tables,model csys,stock csys Maybe someone has an example or tutorial videos?

Thank You Slyym

You have the size in the center 2.594 5th Axis CONSULTING said rightly ! If you want to see the correct body create a middle line and surface R7.25 after R6.3 create 3D contour -ball mill 3.32 with off control and project (finish project) this path on this surface R6.3, then create a stock model and you will see the result

Need to draw surface.In the example Ben surface is bent in the middle.Look 5 Post - blue line.

Now try to pass cutter - 3mm - finishing - flowline - it does not take place - in mid radius distorted

Can you show an example?

All dimensions are present in the photo Problem, if you to use Swept face is directed the red line The surface should to turn in the middle like the blue line Flow lines should be stationed as a middle line R7,25 , on that channel will move the ball. I tried to do it in solidworks & mastercam but could not

Jay I tried this, the surface is obtained distorted, fails in the center of size 3.32

How to create a groove in the body, how to cut a groove in the body, or how to create a surface.

Why this dont work?