I have an opportunity to purchase this machine :

DECKEL-MAHO MC-800H 5 AXIS HORIZONTAL MACHINING CENTER

1996

SPECIFICATIONS:

1) TRAVEL:

X - AXIS 800MM

Y - AXIS 600MM

Z - AXIS 600MM

FEEDRATE 1 - 10000 MM/MIN

RAPID TRAVERSE 15000 MM/MIN X/Y AXIS

30000 MM/MIN Z AXIS

2) SPINDLE:

SPINDLE NOSE BT 40

SPINDLE SPEED 12000 RPM

3) TOOLS:

CAPACITY 120 ATC

MAX. TOOL DIAMETER 130 MM / 230 MM

MAX. TOOL LENGTH 400 MM

MAX. TOOL WEIGHT 20 kg

4) SWIVELLING CIRCULAR TABLE

-CLAMPING SURFACE WITH PALLET 500 x 630 MM

-CENTER HOLE DIAMETER 50 MM

-ROTARY MOVEMENT

* MAX. TORQUE AT PALLET 1610 Nm

* TORQUE CLAMPED 5640 Nm

-SWIVELLING MOVEMENT

* MAX. TORQUE 2650 Nm

* TORQUE CLAMPED 4560 Nm

-RAPID TRAVERSE

* ROTARY MOVEMENT 20 RPM

* SWIVELLING MOVEMENT 11.2 RPM

-MAX. TABLE LOAD 500 KG

-WEIGHT WITH PALLET 2800 KG

FLOOR SPACE 4468MM x 4748MM

EQUIPPED WITH:

HEIDENHEIN 532 CNC CONTROL

MAIN DRIVE 22kW AC

AUTOMATIC TOOL CLAMPING

PRODUCTION PACKAGE WITH COOLANT THRU SPINDLE

CHIP CONVEYOR

HAND HELD CONTROL PANEL

BROKEN TOOL DETECTION

COLOR MONITOR

ROTOCLEAR

NC- SWIVEL TABLE (5 AXIS)

PALLET CHANGER

CHILLER UNIT

RENISHAW TYPE MP8 MEASURING PROBE

KNOLL VACUUM ROTATION FILTER

BALLUFF TOOL ID SYSTEM - READING/WRITING

TRANSFORMER FOR 480V/60Hz

Your opinion is really important. this machine is not in Israel and i have to decide if i'll fly to check it before buying.

The seller claims that the machine worked only 10000 hours (2 years) and he wants for it about 150,000$

Is it worth the money?

Thanks.

Chack this.

Link

Sorry i didn't reply before, i wasn't around.

Anyway, my question has nothing to do with the wall.my question is if there is a way to contour "zigzag" when cutter comp in control.

I will check the ftp tomorrow at work.

Thanks for your replies.

Hi,

Think about a wall that i have to clean using climb mill (G41) when cutter comp in control.

I'm am using a special Iscar tool that suppose to work great at high speed machining.The max depth cuts are 0.75mm and i have wall height is 77mm(!) anyway, when using G41 it cleans the wall and then rapid up to the retractand then rapid back to the begining of the chain, goes to the next depth and run again.

IT TAKES TIME!

in high speed machining i prefer "zigzag".

In what way i can clean this wall in zigzag?Is there any cycle that will handle the switches between G41 TO G42 when contouring in zigzag?Is there any chook for this feature?

Thanks,

I want to send it to someone that will come to IMTS. i will pick it up when i'll be there.

Anyone?

Hello....hello.....hello....

Is there anybody in there...

I use file descriptor all the time, i write there notes about the progran and the revision of the part.

After thousands i really hope then when converting an nc file from v9.1 to v.X i will not lose this nots like happened from v8 to v9.

And welcome to the forum!

I use the pro-e converter and it works great!

The solids i get from pro-e are as good as solid models i convert from solidworks (sldprt).

If you have a problem converting or you can't get you reseller send me the file, i will convert it for you (i hope i am not offering somthing illegal, after all i don't think it is a problem helping once in a while).

Dear mr. Winnie.

Always the truth...

You should replace your nick from winnie to Fox Mulder (unless you prefer Scully)

Windows ME is a mistake of Microsoft!

You should format the laptop and install windows xp pro (or 2000,but xp is better).

Anyway, let a professional do it for you (it doesn't cost to much) and don't format it before you give it to him, there is a lot of information he will need before he will format (The network configurations etc...)

Dear Mr. Winnie the pooh.

When a pesron asks a basic question and from his question you see that he is not a computer guru, how come you give him an answer that he doesn't enen know what you are talking about (partition, unformat etc...)

A person with a basic knoledge has to know that after formatting he can FORGET what he had in his hard drives, and he sould be sure that this is what he wants to do and that he knows how to reinstall it again.

You should learn how to use norton ghost.

After installing a formatted computer, and updating all the drivers you should use ghost, and the next time you will decide to format, you will be able to restore your basic configuration using the ghost software in minutes.

Here it is!

Link

Just noticed you are club 75.

You got yourself 2 beers now...

Paul, If i'll come, (i need to get a permission from my big boss-my wife ) beer is on me.

IT CAN'T BE SOLID MODELS!!!!!

If it was, after shooting the monster i should get an ERROR : THE DISJOINT BODY ERROR

how big is this IMTS??

Is it bigger then EMMO?

Working!

Get this game.find time.taste the fear...

I'm working on the links guys,give me a chance

I give you guys 5 minutes of playing this game before you run to bed to your wifes crying like babies...

I wonder if the monsters created by Mastercam...

[ 08-08-2004, 04:01 PM: Message edited by: Elad ]

You should have G49.

I use mpmaster.pst with v9.1 with no problems.

are you sure you didn't play with your post??

Traitor!

Anyone can recommend a nice hotel nearby?

is there any chance to get a room?

will you be there?