Gunther, I trying to install X+ for x5 on Windows xp and I'm getting an error massage. the only thing I can make out is c:\programfile\mcamx5\mfc_crap.dll. I'm not sure how to post out a screen shot Any thoughts?

8 VMC 1 GRANTRY 4 HMC

Yes Count me in

Ron No problem

Lyndex for the shorter end mill holder, Tecnara for the longer reach end mill holders and Collet chucks.

Crazy^Millman, What can I say, Its how people like to do things here. If I had my way I would be posting out all the right B moves instead of "B0" at every index. Over time I'm sure people will come around. Jay

Paul At the machine, the operator sets each face that gets worked one as a seperate workoffset (X Y Z and only on parts that I can center on the pallet do I use the index positions (B0 B90 B180 B270) Thanks dave i will find pfcout in the post and change it to "B0" Jay

Using the MPMaster post is it possible to force B0 at every index, in place of say B90. B180. B270 Example N20(SPOT .1969 DIA THRU 3PL) T20 M6 (3/8 X 90 SPOT DRILL) G0 G17 G40 G49 G80 G90 M11 G0 G90 G54.1 P10 B0 M10 G0 G90 X-2.875 Y4.1112 S2032 M3 M8 G43 H20 Z2. G98 G81 Z-.093 R.1 F10.1 X-3.7392 X-2.875 Y-4.1112 G80 (SPOT .1575 DIA ON END 3PL) G91 G28 Z0. G28 X0. Y0. M11 G0 G90 G54.1 P12 B90.(would like to keep this at B0) M10 G0 G90 X2.4803 Y1.4961 G43 H20 Z2. G98 G81 Z-.0735 R.1 F10.1 Y0. Y-1.4961 G80 G80 M9 G91 G28 Z0. M5 G28 X0. Y0. M11 G28 B0 G90 M30

Have you tried extrude add boss?

I remember a flex writer during my apprenticeship. Lots of pencilcam. First real cadcam was some crazy thing Cadkey put out around 1995/1996. Then Mastercam V6, upgraded to V8. Someone then had the bright idea to abandon Mastercam in favor of Camworks by Tek-soft. Changed jobs used Mastercam V7. Changed jobs once again, began using Tek-soft Pro-cam. Got fed up with the lack of support tek-soft.Got back to Mastercam V8 Level 1, Upgraded to 9.1 Level 3 with Solids. Just been offerd a job were they use Surfcam. Have an Interview tomorrow with a Company that has Mastercam ( Fingers crossed), Overall, to pay the bills I will Learn Surfcam. If you know Solidworks, then Camworks is okay but its still a Tek-soft product that I find clumsy at best. People I talk to that don’t have Mastercam say, If They had the $$$ they would get Mastercam.

Hey guys the local cable company finally got its $%^& together. I have put the casting body my former employer wanted to draw in 2d and machine in 2d on the ftp site MC9 folder phototube. Not a really difficult part, Clamp to 4th axis or haas indexer Produce all inside features in one set-up

Thanks all Cadcam the cable company tells me they are having problems within yahoo. The search engine works a little better this morning, but still no Email

Yes Im using the I link on top of the page and can see all the files Im using yahoo to surf / although yesterday and so far this morning the search engine times outs and i can not get to my Email.

Thanks cadcam I followed your instructions and still get the following: Error occurred copying a file to the ftp server, Make sure you have permission to put files on the server. What else could I be doing wrong?