Bill Sp
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Bill Sp
-
I believe the last version to do that is V7, and it was called reverse post as Neil said.
-
I program the same way,using the center of rotation of the B axis to keep it perpendicular. Bores at different angles is all done with Mazatrol by defining a new planes.
-
I do it often to cut luer threads on mold inserts. I do it on an Integrex and using Mazatrol.
-
You can just rotate the geometry, regenerate and repost.
-
Dan I'd like to see the example too. Could you mail it to me? Thanks
-
I think its either T32 mode or standard mode. Its parameter p16 on my controller.
-
We had the same problem with all of our Athlon computers, we had to add larger cooling fans on the cpu and cases.
-
We would hole pop and wire it.
-
We will not machine or grind it in our shop. Instead we use Moldstar 90, or Moldstar 150, it is Beryllium-Free. Performance alloys has excellent information on the materials. http://www.performancealloys.net/
-
How do I get 2-D geometry from a solid file?
Bill Sp replied to Maj. GigaHurts's topic in Industrial Forum
You can get on flat plane geometry to cut in the lathe Choose Main Menu, Xform, Squash -
I just did engraving on our Integrex 200 sy. I did like Jack stated and transformed roll the etching to the part. There are parameters that need to be changed to be sure you are using the "T-32" compatable mode or "standard" mode. The parameter is P13 bit 3.
-
We build alot of fixtures for or wire also. We use 420ss its much easier to grind than 440ss. I think that is what all 3R is made from also.