Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I'm trying to use the gap control , but it does not seem to work like I want? The problem is the these counter bores are on the edge of the the part where there is a radius on this edge. I am getting too many "rapid retracts" because of the interruption.
That's why I need to fill these counter bore with a surface so when I go to machine this edge the transition is smooth.
I think it would be best for me to try to put a screen shot of this counter bore on this post. So I can demonstrate this. But I cant seem to figure out how this is done.
Martling : I tried the surface->fill hole. But that only seems to work in areas where the surface is one complete surface. Like I said these there are several surface around the counter bore. And fill hole with surface does not apply for this.
Thanks anyways
Hello : I need to fill or cover a counter bore with a surface.
The surface that surrounds the counter bore is broken up into several surfaces.
Questions :
1)How do I go about filling this with a surface ?
2)And which of the surface commands should I use?
3)I am also trying to import this file or take a snapshot of this counter bore to put it in this post. I tried using the "Alt Print Screen " command , But I can't figure out how to do this.
Can anyone please help ???
After several issues I have had to upload it on the FTP site (Thanks to Jay K. for putting this website up !!! ) .
The file name is: STROBE YOKE CVR REV 1
Thanks to all !!!
Hi : I have a part that has a large pocket. I ran a
Surface rough Pocket on to remove most of the material and I left .100 of stock.
Now I just want to go back and remove the remaining stock (.100 ) and achieve a good finish.
Does anybody have a good suggestion as to what kind of tool path I should use for this ?
I am willing to email this file to anyone to better help me out.
I really don't know what I am doing wrong and I would need some guidance with this. All help would greatly be appreciated.
Thanks
Hello: I cannot seem to figure out what I am doing wrong ??? When selecting a drive it picks the whole part. Which is ok . But then when I go to select the
check surfaces it selects again all the drive surfaces. And I can't seem to select what I want ?
Is there something that I need to "turn off" or "turn on" . Any help would be greatly appreciated.
Thanks
Hello Everyone:
I am trying to use Mastercam X demo version. To teach myself. But I have some issues in which I would really appreciate any advise.
The problem is that when I open any of the sample files.
I hold down the roller on the mouse in order to to orientate the part the drawing begins to jitter and it walks out of the view.
I am pretty sure that it is my NVIDIA card.
Is there any way I can tweak the settings ? If so which ones should I adjust.
Or should I just get a different model card.java script:void(0)
Curse
Usually I am here at 6am everyday. Because I like to work a minimum of 8 hrs.. And leave early to enjoy my afternoons at home.
I guess the rest of the guys here just pace them selfs different.
IT department also has a late schedule too. I guess this is part of the problem of working in California. The atmosphere is very relaxed here. Plus we are an R&D company. No production here at all (we send it all out).
Fred
I guess I'm screwed the nethasp is in the server room (which I have no access to ).
Then I guess we will all have to learn to log out of MC when we are done using it.
Hello everyone : Here at work we have just recently purchased Mastercam level 3 with Design,Lathe,Mill. We have a nethasp. This is the first time that I have used this type of hasp.
Apparently one of the engineers here (wannabe machinist ) Has checked out all licenses. During my absence yesterday. And now he is not around (has a late schedule) .
I want to use MC but I get an error message saying the following : "Error checking out Mill level 3 al available licenses in use"
Anyways is there a way of getting around this issue ?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.