Alex2009
-
Posts
16 -
Joined
-
Last visited
Alex2009's Achievements
Newbie (1/14)
0
Reputation
-
You can try to make a 3D tool compensation for your machine
-
Interested in how to create a contour ramp % O1111 ( T470 | 10. FLAT ENDMILL ) G21 G0 G17 G40 G49 G80 G90 T470 M6 G0 G90 G54 X-40. Y20. S1900 M3 G43 H470 Z1. G1 Z0. F190.9 G41 D470 Y15. F381.8 X-25. X30. Z-.357 Y-15. Z-.5 X-30. Z-.857 Y15. Z-1. X30. Z-1.357 Y-15. Z-1.5 X-30. Z-1.857 Y15. Z-2. X30. Z-2.357 Y-15. Z-2.5 X-30. Z-2.857 Y15. Z-3. X30. Z-3.357 Y-15. Z-3.5 X-30. Z-3.857 Y15. Z-4. X30. Z-4.357 Y-15. Z-4.5 X-30. Z-4.857 Y15. Z-5. X30. Y-15. X-30. Y25. G40 X-35. G0 Z1. M5 G91 G28 Z0. G28 Y0. M30 %
-
Hello! I tried your program pocket and face mill and they work- Thank you! In one line was a mistake Z# 26 + .1 need Z[# 26 + .1]
-
Thanks for the help!
-
Hello everyone! Somebody works with Mastercam & 3D printer, how to create a toolpath in Mastercam for 3D printing But I found only for this c-hook Addmаn http://www.camufacturing.com/addman.cshtml
-
I tried your new program, motion takes place in the first depth, after do one step by X and Y one step, and then goes to the next depth, and the program ends
-
Hello Cncchipmaker ! I tried the program on the machine, but the tool path is wrong, it can be seen in the photo the transition to the next depth, it comes on the z and then follows retract and end and i find 1 error #120=#106 #IF[#120LT#110]THEN#120=#110 WHILE[#101GT0]DO1
-
Thank you Cncchipmaker! Error in line and there is no number 50 IF[#105EQ0]TOTO50
-
Hello Cncchipmaker! I Interested in how to do this with step by Z(step down) and use modal call (used as a cycle)
-
Hi Everyone! The question is how to create a rough pocket . I saw it on the machines "Hardinge/Fanuc System II - VMC Series II" but it is used as a cycle G72 Maybe at somebody have this cycle,please share
-
deleted, I found the answer
-
deleted
-
I found Information in one book, but do not know is true or not. "Macro Enable parameter bit – Parameter 57 bit 22. This parameter allows for the entry of macro statements. This parameter is used at the time of program entry not program execution. If this parameter is turned off and a macro statement is entered, the control will ignore it. If the program is loaded from a file, these statement will be converted to comments. If the statement is loaded manually in MDI or edit modes, the control will give an alarm. "
-
Hello! How to enable macro programming on this machine? And if anyone has any documentation for this machine, please share!
-
Hello! Has anyone tried to output 3D tool compensation in Mastercam use macro? This was done by one person in NX. Interested in your opinion how to implement it.
