Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hello everyone! Somebody works with Mastercam & 3D printer, how to create a toolpath in Mastercam for 3D printing
But I found only for this c-hook Addmаn http://www.camufacturing.com/addman.cshtml
I tried your new program, motion takes place in the first depth, after do one step by X and Y one step, and then goes to the next depth, and the program ends
Hello Cncchipmaker ! I tried the program on the machine, but the tool path is wrong, it can be seen in the photo
the transition to the next depth, it comes on the z and then follows retract and end
and i find 1 error
#120=#106
#IF[#120LT#110]THEN#120=#110
WHILE[#101GT0]DO1
Hi Everyone! The question is how to create a rough pocket . I saw it on the machines "Hardinge/Fanuc System II - VMC Series II" but it is used as a cycle G72
Maybe at somebody have this cycle,please share
I found Information in one book, but do not know is true or not.
"Macro Enable parameter bit – Parameter 57 bit 22. This parameter allows for the entry of macro statements. This parameter is used at the time of program entry not program execution. If this parameter is turned off and a macro statement is entered, the control will ignore it. If the program is loaded from a file, these statement will be converted to comments. If the statement is loaded manually in MDI or edit modes, the control will give an alarm. "
Hello! Has anyone tried to output 3D tool compensation in Mastercam use macro? This was done by one person in NX.
Interested in your opinion how to implement it.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.