Thanks, but the only CDS Lite program I can find is for backing up files. What is BTR function and how does it work? I could call Anilam but they are very slow with response time. Thanks for your help.

Having a problem running long programs on an Anilam 6000I control. Have mill hooked up along with a robot. If we want to run all weekend it will lose itself. Seems there is not enough ram. Not windows based software. Is made by Heidinhein. Was wondering if anybody else had similar problem and if so what you did to help solve the problem. Any help would be appreciated.

Belmont Equipment Company Madison Heights, Michigan Contact Don Ligrow [email protected] 1-800-356-4811 visit belmont4edm.com

Thank You

Am bringing in a file with a lot of arcs. In these arcs I have to draw in some center points. My problem is that when I bring in the file the arcs always come in as nurbs splines. Is there a way to convert these back to arcs, or is there a way to put center points on splines? Any help will be appreciated.

No spaces, just a number or a number followed by a letter if there are more than one program. 12345 or 12345b

HTML.SET

Hello, Did a search on setup sheet problems and found nothing on this. Whenever I try to make a setup sheet it starts to process and then comes up with: C:mcamxmillnc_____.doc not found this path does not exist or is not a directory The place _____ always comes up with my program name. Not sure how to change the path. I looked at the .set file and did not see anything like this.

Thanks, I did not even think about using MC's editor. But thats the kind of week I am going through.

If I want to customize a setup sheet, how do I open an .set file to tweak it? Do you have to have specific software to open them?

Nope, I have to control-alt-delete, then end task back to desktop. When I start over, the same thing happens. Not sure what I did or what button I pushed. Things have been going good with McamX untill this.

All of a sudden when I try to create line endpoint I receive a message (Mcore 6-drill parameter #2) I can not get out of this because it tells me I have not ended the task. I am not making a drill program or any other kind of program, just design. Anyone have any ideas about this?

When converting files in MCamX it wants to automatically switch back and forth from inch mode to metric mode. I would like everything to convert in English. My config file is set to english as default. Is there something else to set besides this? It drives me crazy having to scale everything. This did not happen in MCam9, you physically had to switch from metric to english.

just go to view, viewports, pick what you want

OK, got it. Thank You Very Much.