ScottBro4
-
Posts
55 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ScottBro4
-
Toolpath Which is the best toolpath to machine this part ?
ScottBro4 replied to antonylv12's topic in Industrial Forum
A Dynamic Optirough would work. -
Have you tried using the help menu? There is quite a bit of information there.
-
I would love to see a file. Really think it could just be an issue of which plane you are in. I use the same generic post and never have an issue with it.
-
Mastercam X9 Stock model Toolpath tolerance
ScottBro4 replied to deamon32's topic in Industrial Forum
Generally I would set your stock model tolerance based on how much stock you're leaving on your surfaces. I've had issues where I leave .010 stock and set my stock model tolerance to .010 and you will sometimes get gouging. If you are leaving plenty of stock you can set both higher and it will make your file smaller(less loading time when regenerating) but will be less accurate in how much stock is on your finished part. Hope this answers your question. -
Hi Newbie. I Don't know what you have for tools that will reach or what tool paths you are running but if you haven't tried Rest Roughing give it a try. If you have any issues Id be happy to help.