I've seen this back in v7. My way around was click on "Compress" button and open the same TL file that you made the changes in.

Did you turn off the Filter Active check box in Tools Manager?

Since we are talking about Backplot and Help file, here is an other good tip in the MC Help file on Backplot:

*****

Notes:

You can step quickly through the backplot by holding down both mouse buttons at the same time while choosing Step.

*****

"Alt + H" is my teacher.

Program restart function in Cimco Edit has been requested. The way to do it now is use the good old "Copy" & "Paste".

FYI, Cimco DNC-Max allows you to restart program from "Line Number", "Block Number" or "Tool Change". And it works in both Manually and Remotely.

Right on, they are way "too safe". My way around it is create my own tool libraries (one for each material).

Program a drill path and select centre drill cycle(G81) or chip break cycle(G83).

Try email to: [email protected] or visit http://www.kryle.com/

Scroll function works fine with my PFE32 Editor (without update, just the one comes with Mastercam), I'm using W2K, Mastercam V8.1.1 and logitech first wheel mouse (USB) on a laptop.

You can put it in many places in the post, I prefer to put it in where the post "General Output Settings" is.

Copied a little info on that post block for you (in case you don't have it):

"ppostparsetool: during look ahead for tool change info"

"ppostparsetool:

This postline is similar to 'ppostparse'(see below) except that it is executed immediately after each line is parsed during a look ahead for tool change information."

"ppostparse:

This postline is executed immediately after the nc line is parsed. When used with 'ppreparse', as described above, this postline can be used to check if a variable's value has changed and restore the original value if it has not. Like 'ppreparse', it is not advisable to have any output on this line since many lines are read and parsed during a look ahead."

gcode is right, the info of Mastercam program is kept in the nci file, the post is the translator to convert nci into NC codes.

Main Menu --> File --> Edit --> NC

1. Try the HTML setup sheet from eMastercam.com and see if you like it (however, this one does not show the part).

2. Predator Virtual CNC's HTML setup sheet can do the things that you want but you have to run you NC codes through Virtual CNC to get it (they have a chook for Mastercam as well).

May I add:

When you want to differentiate between operations (such as between Milling and Drilling), an easy way to do is to use variable "opcode".

In Mill, opcode 3 is for drilling operation. So in your case you can do something like this:

if opcode = 3, ......

else,......

Ooops, misspelled a word : )

[This message has been edited by Ying Jiang (edited 06-09-2001).]

Use software handshake.

A: DB25 to DB25

CNC(DB25) Computer(DB25)

1 Ground

2 ---------------- 3

3 ---------------- 2

4&5 jumped

7 ---------------- 7

6,8&20 jumped

B: DB25 to DB9

CNC(DB25) Computer(DB9)

1 Ground

2 ---------------- 2

3 ---------------- 3

4&5 jumped

7 ---------------- 5

6,8&20 jumped

[This message has been edited by Ying Jiang (edited 06-07-2001).]

[This message has been edited by Ying Jiang (edited 06-08-2001).]

Cimco Edit comes with two editions: Standard and Professional.

Only Professional edition has backplot function. Both Standard edition and the OEM version that comes with Mastercam can be upgrade to Professional version.

30 days demo (fully working) Professional edition can be downloaded from http://www.cimco-software.com / or http://www.inhousesolutions.com/cimco/ or http://www.cimco-integration.com/

Email to the following addresses for price info:

Canadian users: [email protected]

USA users: [email protected]

Users in other countries: [email protected]