Check Pricewatch.com A Quadro FX 1300 can be had for slightly over $300.

Sounds like a different problem altogether.

Lol. I work in a seperate building from that bird now.

It seems, at least on my system, to progressively run slower the longer it is open. Closing it and restarting makes it better.

I think you would have to Save some, and then open it and save as.

I am starting to understand why some react the way they do to your comments. Don't get me wrong, you have helped me in the past, and I am grateful, but WTF with that response to a legitimate question?

No help with that, but where do you work in Cortland?

I tried it. Very strange.

Is it a file you can share?

No problem, just passing along what I was told to do. Doesn't it make you wonder why though?

Right click desktop, Settings tab, Advanced box, under the Quadro tab there is a performance and quality setting. Turn unified back / depth buffer off. That should do it.

Get the right driver, disable this, disable that.... I don't pretend to have the slightest idea what is involved with creating software, but it does seem like it could be made to use with a given piece of hardware without having to tweak settings to make it function reliably.

It works differently than it did in 9. In 2d mode it will offset and move to your current z height - in 3d it will offset at the z depth the geometry is already at.

What is this patch for??

I will take note of the functions as they occur for a while.

Sometimes it just isn't an option after doing stuff in the graphics window. Trim comes to mind, Create Arc Tangent to 3.

I don't see where anyone addressed the sometimes unpredictable behavior of undo that was brought up in the initial post?? Windows functionality or not...

No problem here.

If they are straight lines, filter will join them.

Why does my mastercam say this in the title bar? When I do Alt + V it says X2 [11.0.3.25].

Maybe try breaking the arc into a few segments??

Not sure if this is related, but, if I move the red arrow in the ops manager to a machine group or toolpath group that uses a different WCS it will change my current WCS on me. Very annoying. Anyone know how to stop this from happening?

create spline

Be careful. I have had one seem to be working, but it dropped large chunks of code in the tranfer with no warning or error at all.

If I remember right, this was resolved after running through the nView Desktop Manager Wizard.