Bryan Johnson
-
Posts
993 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Bryan Johnson
-
A good laptop for running Mastercam??
Bryan Johnson replied to Mike@Dive Lab Inc.'s topic in Industrial Forum
Dell Precision M60. It has the nVidia Quadro FX Go 1000, w/128mg Very Stable, and graphics are great. It also has both serial and parallel ports. -
right click on desktop. select display properties, setting, advanced button. Select the Troubleshoot Tab, and decrease the hardware acceleration.
-
Spot Drill for Chamfering. Yes, I use with contour, chamfer and cutter comp and have had no problems. Except you can not allow for any flat on the cutter. The problem I have with using a Chamfer Mill as the tool type is that there is no option to define the default drill cycle. When I pick a drill I like for the cycle to be set automaticly.
-
using mprouter.pst that is included on the 9.1 CD, change the following: pwrtt #if t >= 1, ptoolcomment to this (by removing the "#") pwrtt if t >= 1, ptoolcomment
-
Mastercam does allow the "Chamfer" option with tools defined as Chamfer Mill or Spot Drill. I use the same tool a lot for spot and chamfering, and find the Spot Drill tool definition to work best. For a 3D chamfer, try a Ball Nose EM, and Surface Finish Project toolpath. Use neg. amount of stock for chamfer size. This gives an even result.