Jim Have recieved my lattest email?

quote: I hate to dissappoint you folks (since you like to beatup on art so much) but there was only one CNC employee that was devoted to Art and he came from the educational office. Mark How many pepole are working on all the past issues with lathe that have been around for years now? Why do me have to pay for matianece for lathe, is it all the new options in lathe, is it all the new tool library options, is all the fixes in canned cycles, maybe it all the new tool paths in lathe, the work arounds these issues are free here on the forum.

Josh if ya need any help just give me buzz.

John When you produce parts and there is bugs in those parts what does the cutomer do?

+1000 Phil nothing but promises on lathe.

John it is the same thing, like it or not, you purchase something that is suposed to work and it dosn't then what? Ok maybe not the same thing its like buying a car you follow the instuctions but the car crashes wiping out your house that you paid for hows that?

Try this Yours code: ptooltable #Tooltable output sopen_prn, *t$, sdelimiter, pstrtool,# sdelimiter, tlngno$, [if comp_type > 0 & comp_type < 4,# sdelimiter, tloffno$, sdelimiter, scomp_type, sdelimiter, tldia$], [if xy_stock <> 0 | z_stock <> 0, sdelimiter, xy_stock, sdelimiter, z_stock], sclose_prn, e$ Change to this code: ptooltable #Tooltable output sopen_prn, *t$, sdelimiter, pstrtool, e$# sdelimiter, tlngno$, [if comp_type > 0 & comp_type < 4, e$# sdelimiter, tloffno$, sdelimiter, scomp_type, sdelimiter, tldia$], [if xy_stock <> 0 | z_stock <> 0, sdelimiter, xy_stock, sdelimiter, z_stock], sclose_prn, e$

Jim you have mail

Jim send the ring file to my home email I will take a look and try the transform for ya and send it back. I have done this many times. [email protected]

Ron not a move I am running Barefoot south.

Jim I have called 3 times now and got no answer then it sounded like a fax machine.

No

WTF

Jim Change your retract to 3.0 abs. that is what you need to clear your clamps as was said clearance is at the beginning and end of the wire frame chain, retract is between passes.

Jim let me look at your file. Also I will be calling you in a couple hours Jim

It is above but here [email protected]

Jim If you are still interested send me an email to my home again.

quote: Interesting stuff. Nick Moffitt from Verisurf was in my little tightly packed shop this morning and he's got some good stuff.... I think his software (which is pretty kewl I might add...) and an arm will do what I need pretty easily. I also think I'm going to need a CMM to keep the eye candy guys happy. I think I'll be adding one to my shop in the near future. I understand it will write probing routines for my horisontal as well. Good stuff. Jim I told ya to check out Verisurf. Tim I should start getting a comision

Also add them here. code: [CTRL_MILL|DEFAULT]

forget that misc 9 thats not it at the end of your post file in the text section did you add the ifo here code: [CTRL_MILL|MPFAN-PROBE] [misc integers]

Try adding code: usecanmisc9$ = 1

Are they on here? code: # -------------------------------------------------------------------------- # Enable Canned Drill Cycle Postblocks, set for mill and lathe # -------------------------------------------------------------------------- pcuttypldrl #Change cut parameters for lathe drill usecandrill$ = 0 usecanpeck$ = 0 usecanchip$ = 1 usecantap$ = 1 usecanbore1$ = 0 usecanbore2$ = 0 usecanmisc1$ = 0 usecanmisc2$ = 0

Try restarting MC

jim you have mail

Malibu There is a switch in the post old style or new style G76 change that.