Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi,
i know with raster and surface finish parallel the toolpath goes back and forth ect..
But is there an option to do a final pass around the tool boundary therefore cleaning up scallops left by the back and forth path?
Thanks for the reply..
This is close but not quite what i was after..
say first contour at A0. X0. next at A90. X-50.,then A180.X-100. then A270.X-150.
i could maybe arrange transforms with one rotate then transform but it gets tricky when you say have 100 times you want to acheive..
I thought that maybe the transform option combined both rotate and transform..
Thanks again !
Hi,
Im wondering is it possible in x9 or later to say translate a toolpath not only incrementally in x direction but angular as well by a specific A value..
ive tried axis sub but its not what i want..
I just want a say circular toolpath (no ais sub) and then to be able to translat in x and a..
Thanks!
Hi,
Not sure if this is possible but a customer has given me a solid model of a part..
Can i say create a solid rectangle model that is bigger than the supplied model and make an inprint into it of my supplied customer model?
Sort of a reverse imprint ..
Thanks
Hi All,
Would a NVME m.2 drive be ok to install mastercam 2020 on?
We are wanting to build a new Pc and was wondering what everyone else would do to get the most out of 2020..
Thinking ryzen9 12c processor ,32 gig ram, 1tb ssd for saving files to and a quadro P2200 card..
Would this be an all round good combo for fast calculations and good backplotting
Thanks
Hi,
what is everyone using in regards to job tracking software?
I actually just need to be able to raise a P/O and keep a data base of quotes..
any recomendations for someone in Australia?
Thanks
Hi All,
would anyone have an x9 post that can output the correct format for P1-p48 work offsets as below?
L1000 L1001
G28 XYZ ; Reference position return G43 X-10.Y-10.Z-100.H10.; Contour
#100=1 ; Initialize added workpiece
coordinate system P No.
G01 X-30.;
G90 ; Absolute value mode Y-30.;
WHILE
[#100LE48]D01 ;
Repeat P No. to 48 X-10.;
G54.1 P#100 ; Set workpiece coordinate
system
Y-10.;
G22 L1001; Call sub-program G00 G40 Z10.;
#100=#100+1 ; P No. +1 G98 G81 X-20.Y-15.Z-
150.R5.F40;
Drilling
END1 ; X-25.Y-20.;
G28 Z ; Return to reference position X-20.Y-25.;
G28 XY ; X-15.Y-20.;
M02 ; G80 ;
G23
regards
Hi All,
Would anyone be able to take a look at this issue for me?
Im trying to cut 2 curves on a shaft that are basically at 180 deg to each othe but i just cant seem to get it
happening without an error..
Ive tried selecting the curves directly and unrolling them ,then selecting them using axis sub but still gouges my part..
Any help would be very much appreciated..
Thanks
euan brass reel.mcx-9
HI All,
Im trying to get my machine to read a certain directry on my pc via ethernet..
Although at the moment i can actually send files to both the machine memory and the memory card from my pc via the ethernet i cannot read from the machine to my PC..
Ive attached a pic of my settings and im just after some advise as to wether or not the path is correct..
Thanks and sorry if this is posted in the wrong furum..
Hi,
Ive created a new config file in x9 and saved it..
I want it to be my default config file but it keeps going back to my original file..
How do i force my new config file to be the default?
Regards..
Hi All,
In dynamic mill is there a way to force the tool to continuously be cutting my part rather than looping back and taking swipes on one side then looping back to the other side to take more cuts?
Thanks
Hi All,
Whats the secret to creating custom drawn tools in x9?
I know thay have to be dxf files but im not sure of the orientation of the tool..
Is it drawn on a centerline?
Thanks
Hi All,
Ive tried and tried..
Whats the secret to selecting points on a specific arc raduis?
I can select the arc i want to be used but then im stumped at how to have x9 make the selection from there..
Thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.