Metalmuncher
-
Posts
110 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Metalmuncher
-
I will not be running the machine and my operators are somewhat challanged so I have to make this as simple as possible I need to use cutter comp as it is 316L s/s and they want a 3B thread
-
I need to do multiple passes when thread milling cannot seem to get a roughing and finish passes using the same tool offsets
-
plunge is the most effeicent way to remove material if you have the horsepower and the least wear on the machine if you have the horse power.
-
Try doing a search in modern machine shop they had a articale on how to mix up your own batch
-
robk I guess that place is out of bussiness now cannot sell it anymore I looked far and wide and cannot find it anywhere. Good luck
-
I will send it soon
-
You can get Tap out @ National Marketing Group phone #805-254-7127
-
The solition is called Tap out should be avaible from a tool supply it works great in alum.
-
insert a new line with the m3 command and the machine should take it bofore moving to the next line What kind of machine?
-
I just started working here, and programming and have a new p.c, e-mail,internet, a.c.,fridge and a nice little office