Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi all, this warning I received from Vericut, it reminds me of an alarm I had seen from the Haas controller before. something that said "radius too large" in the alarm perhaps and when looking at the line that causes the warning the radius is a lot bigger than any of the other i or j values around it... Any insights? when my machine finishes running I am going to see if it causes any alarms in graphics.
Warning for line 439574
X1.9426 Y-4.339 I-13.3641 J-.0059
Warning: Arc start and end points may produce undesirable motion on Fanuc controls at line: 439574
G03 X1.8508 Y-4.1938 I.0132 J-.0401 F600.
G01 X1.7975 Y-4.4663
X1.7903 Y-4.503 Z1.7947 F15.
X1.7968 Y-4.5348 Z1.7712
G03 X1.8952 Y-4.5329 I.0484 J.0382
X1.9425 Y-4.3521 I-.2073 J.151
X1.9426 Y-4.339 I-13.3641 J-.0059 (line:439574)
X1.9386 Y-4.2169 I-.4958 J.045
G01 X1.9338 Y-4.2045 Z1.7806
X1.9016 Y-4.1838 Z1.8087
X1.8842 Y-4.1857 Z1.8212
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.