Operation Manager - lost solids tab

[F800R]

MCX 2020: Today I lost my Operation Manager - lost solids tab. I deleted my config file hoping a fresh one would bring it back, but it did not. I do some design on MCX for fixtures and no Solids manager makes it tough to edit existing features. Anyone have an idea on how to get it back or another way to get to the solids manager? 

 

 

[JParis]

Across the Top, go to View...see if it is checked in there...if not, click it

[F800R]

Just now, JParis said:

Across the Top, go to View...see if it is checked in there...if not, click it

 

Just now, JParis said:

Across the Top, go to View...see if it is checked in there...if not, click it

Perfect, thank you. 

 

 

[JoshC]

7 hours ago, kklaver said:

 

Perfect, thank you. 

 

 

hey you should check out the mastercam quick reference card when you get a chance, that handy sheet gives you all kinds of handy shortcuts and tips, like ALT+O for example to open toolpath manager is listed on this card and would have helped you here. 

Its already on your mastercam pc, just go to Start menu --> Mastercam folder --> Quick Ref card (in win 7 and prior it will be in a documentation sub folder)

or can access it directly here C:\Program Files\Mastercam 2020\Mastercam\documentation\en-US\Quick_ref_Card.pdf