5x Swarf Cycle Crashing on verify

[GGORR]

Hi

When using 5x Swarf Cycle I get a crash when running on verify.

I am machining a tube with my WCS on the centreline of the tube at one end.

When running my cycle through verify once the cycle is complete to wants to go to the X0Y0Z0 position is there a way to stop this as the code output looks ok.

 

Thanks Graeme 

[Greg Williams]

2020 did this, it should be fine in 2021

[GGORR]

Doing the same in 2021

[crazy^millman]

Can you share an example of what you are seeing?  Do you have a 5 Axis machine picked as the machine for the Verify Simulation? Do you by chance have a ref point turned on in the old school swarf? In the new Swarf you can pick a home position in the linking parameters did you pick the origin by accident or have that set as a default some time ago and forgot about it? Have you tried Machinesim to see if it matches what you are seeing in Verify? 

[Chally72]

Hi GGORR,

Barring any home position selections as Crazy Millman has mentioned, there were two issues that produced similar outcomes to this. One was fixed in 2020 Update 2, and one is a fix in testing currently. Please send me the file if at all possible- [email protected] so that I can verify that we have fixed this issue.