Doosan Lynx 2100 LMS post

[SpacePilotPro]

Hi Guys!

I know this is a long shot, but I thought I would ask if someone might have, and be willing to share, a post for a Doosan Lynx 2100 LMS. I know the posts are sometimes tied to the HASP or license, but I thought I would give it a try here on the forums. Thanks in advance for any assistance!

 

[crazy^millman]

54 minutes ago, SpacePilotPro said:

Hi Guys!

I know this is a long shot, but I thought I would ask if someone might have, and be willing to share, a post for a Doosan Lynx 2100 LMS. I know the posts are sometimes tied to the HASP or license, but I thought I would give it a try here on the forums. Thanks in advance for any assistance!

 

Asking for posts is not allowed on the forum. Yes you are correct a post of that nature could be locked up, but I would download the free MPLMASTER from this forum and give it a shot. When you reach out to your dealer they tell you not one for that specific machine and control?

[gcode]

I used to contract program for a small shop that had several Doosan 2X lathes

The MplMaster lathe post available for download from this web site will get you 80% there

right out of the box..and most of the edit's you'll need are just a matter of setting some switches

on the first page of the post

[Guest]

17 hours ago, SpacePilotPro said:

Hi Guys!

I know this is a long shot, but I thought I would ask if someone might have, and be willing to share, a post for a Doosan Lynx 2100 LMS. I know the posts are sometimes tied to the HASP or license, but I thought I would give it a try here on the forums. Thanks in advance for any assistance!

 

Have you seen this?