Looking for step files for step file for Chick 5ML 1550-41 toombstone

[Tim Sureline]

Looking for a step file or equivalent for Chick Tombstone for Mori-Seiki NHX-5000 . Our company recently purchased  the Horizontal and want to get a jump on putting together base program. Chick doesn't seem to have support for 3D geo or prints to create GEO

[AHarrison1]

Try this, I got it off of Grabcad

 

CHICK TOMBSTONE.STEP

[rchipper]

It's not the exact one but maybe you could manipulate it into what you need. Hope this helps.

5ML1540-41CM1759107 7-20-21.zip

[JoshC]

did you reach out to the manufacturer? that would have been my very first place to look, looks like they have a contact us page https://www.chickworkholding.com/4dcgi/public/support/contact.shtml?CTUS=1?PATH=6000023&&_RND=24509_

[rchipper]

12 minutes ago, JoshC said:

did you reach out to the manufacturer? that would have been my very first place to look, looks like they have a contact us page https://www.chickworkholding.com/4dcgi/public/support/contact.shtml?CTUS=1?PATH=6000023&&_RND=24509_

Yes, if you follow the link there are files available for download. I did not see .stp files though. They would probably send you files you need if you ask them. I've done it in the past,.

Good luck.

 

I don't know if this is okay to post. I didn't think of it. Sorry if I broke any rules. I will accept my lashes and move on.

[cncappsjames]

Here's a STEP file

https://www.dropbox.com/s/sx13sqmsuku8ms3/5ML1550_41(STEP).zip?dl=0