Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Matsuura mechanical daily warm-up timer


Recommended Posts

It's like the old rotary timers that we used to have that would turn out lights on and off as a kid.

Your ogre probaby trashed the pawls in the mechanism if I had to guess. I've never seen the inside of one. Those things are pretty old, it's most likely not something you can repair on your own. You can probably call Matsuura parts and order one and change it yourself though. I think there's 4 wires including ground. Been a while since I've seen one.

  • Like 1
Link to comment
Share on other sites
  • 2 weeks later...

I fixed some switches on a barfeed this week that had twisted and the wires pulled out for some reason. I then watched the operator slap the buttons fairly hard and aggressively twist the switch that had just ben re-attached 5 seconds before. 🤦‍♂️ Gorillas I tell ya

  • Haha 2
Link to comment
Share on other sites
On 8/25/2021 at 11:35 AM, Mr. M said:

I fixed some switches on a barfeed this week that had twisted and the wires pulled out for some reason. I then watched the operator slap the buttons fairly hard and aggressively twist the switch that had just ben re-attached 5 seconds before. 🤦‍♂️ Gorillas I tell ya

Some days I think Gorillas have more finesse.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...