Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Old school IGS file will be smaller than Parasolid. Also in Mastercam, if you save all solids as wireframe and surfaces. The file will be smaller. But , I do prefer to work with solids.
AS far as I know, the Haas control does not have what you are looking for. Makino's FMS has what you are looking for. You could use a macros on the Haas to do that. But it would be very complex. But doable.
Do you have
Do you have Mastercam using all of the CPU on the Xeon? You can control that in the settings, same place you tell mastercam to use the graphics card. The graphics card is another thing you should check. Make sure mastercam is using it.
Do you need sharp corners? If not use a bull noise endmill with a .03 corner radii. Try the machining advisor pro from Harvey Tools. I have had great luck using feeds and speeds on 17-4.
https://www.harveyperformance.com/machining-advisor-pro/
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.