Oi-Md + G41 + G3 = fail

[Lorsal117]

i there. today i'm trying to generate a contour of an hole but when i send it to the mill, the program generate an error about the G41

this is the code:

G0 G17 G40 G49 G80 G90
T15 M6 ( TORO 16 )
G0 G90 G54 X102.5 Y138.5 S2800 M3
G43 H15 Z100. M8
Z1.
G1 Z-10. F800.
G41 D15 Y137.5
G3 X107. Y142. I0. J4.5
X102.5 Y146.5 I-4.5 J0.
X98. Y142. I0. J-4.5
X102.5 Y137.5 I4.5 J0.
G1 G40 Y138.5
G0 Z30.
X161. Y237.
Z1.
G1 Z-10.
G41 D15 X162.
G3 X157.5 Y241.5 I-4.5 J0.
X153. Y237. I0. J-4.5
X157.5 Y232.5 I4.5 J0.
X162. Y237. I0. J4.5
G1 G40 X161.
G0 Z30.

 

The holes are d.20 and d.25 and the tool is d.16 , i read somewhere that a too big tool cause problems

the error code appear after the z-10 movement

 

 

[JParis]

I am guessing that you are using Control Comp?

To use control comp you need a move bigger than the diameter of the tool...

With wear comp, you can have a much smaller lead-in/lead-out motion

[Lorsal117]

Quote

 

nope, i'm using wear comp

[crazy^millman]

3 hours ago, Lorsal117 said:

nope, i'm using wear comp

Okay, what is value on the machine is the wear or radius comp?