re:mastercam v9 mill and solids book

[josejose]

hi

 

i`m looking for the book mastercam v9 mill and

solids from mr lin and mr tony shine ,but i emailed a few places (opamp books, sholarsbook etc)and i haven`t get any answer, so can anybody here on the forum give any tip to find a bookstore with this book.thank`s in a dvance

[robk]

Here is my advice... Save your money and buy a decent book. Look here... link

[Carl Vallance]

Try Here http://www.technicalbooks.net/

[Steve Biehl - Cimquest Inc]

I've got them at www.s4a.us under 'Learning Tools' - 'Training Books'. You can buy right on line.

[Thad]

If you do buy that book, you'll get alot of use from it in the bathroom. And I don't mean reading material.

 

Thad

[Steve Biehl - Cimquest Inc]

My order of preferance is: InHouse Tutorials, then the Mastercam Handbooks, then the Scholars International books, then everybody else (probably another 1/2 dozen or so book publishers).

[Guest CNC Apps Guy 1]

I'd stay away from anything with the words Mastercam, Lin, and Schue on the same book. Go to E-Opinions Website. I did a pretty thorough evaluation of that book there. Do a search for Mastercam and you should find it. Basically back in the early-mid 90's when it was the only thing out there it was not bad but now that there are FAR better educational/reference solutions, you're better off staying away.

 

You're a TON better off with going with the In-House Solutions and or Mastercam Handbooks V1, V2, and V3.

 

HTH