VTL DRILLING

[mirek1017]

Hello All ,I am use generic VTL  right  turret machine def with mpfan postprocesor from MASTERCAM,COM web 

When I use turning opetation everything  working good ,all my g codes are positive numbers ,but when I am try use c axis drillng  when I am posting all numbers are negative .I am add my zip to go  file ,can someone can take look haw I can fixing this ?

Thank you for any helping 

VTL DRILLING TEST.MCAM-CONTENT

[gcode]

what tool plane are you using for drilling

we use Right for VTL's with our Postability posts.

[mirek1017]

1 hour ago, gcode said:

what tool plane are you using for drilling

we use Right for VTL's with our Postability posts.

when I use drilling mastercam make plane    top   (top)1  (top )1

the late operation  top lathe vtl 

 

when I want to change the same planes for drilling I got this message 

 

 

[crazy^millman]

Think of Top as the operators view. Gcode is right Right would be the correct choice. I would use C Axis drill. Add the machine to your list and pick it from there. Don't start wit ha generic one it will give you a difficult time wrapping your head around the correct way to use the planes.

[mirek1017]

so ,when you open my file my planes for turning operations are wrong ?

[crazy^millman]

On 10/2/2023 at 12:16 PM, mirek1017 said:

so ,when you open my file my planes for turning operations are wrong ?

These are two different things going on. Turing should do the correct thing and C axis drilling allows for the the live tooling to work if you want to keep the part stationary without spinning the spindle. Should be able to just call a standard lathe drilling cycle and go from there. I was only showing you different way to approach the process sorry I was not clear when i originally posted it.