RS232 IN FROM CALMOTION TO MAZAK NEXUS 640M SETTINGS 544 SET NEW PAPER TAPE

[Runman]

I need help with the configuration of this calmotion to the MAZAK 640m windows 2000 version of this machine tool. I have been running this mill small programs under 1mb from the usb floppy emulator. The file I am trying to run is 2.7mb so I am stuck

 

[Runman]

nothing?

[JParis]

Not really a Mastercam/Machine issue...have you reached out to where the Calmotion unit was purchased?

[AHarrison1]

For the short term can you break up your program to bite size chunks?

[Runman]

43 minutes ago, JParis said:

Not really a Mastercam/Machine issue...have you reached out to where the Calmotion unit was purchased?

I understand its not a MC issue trying to problem solve and network with people that have experience with these issues. the machine this job runs on is down and trying to keep people busy down stream. This Mazak hasnt run programs over 1 MB due to the floppy emulator and I haven't needed to.  Calmotion hasent returned my phone call

 

[cncappsjames]

On 12/11/2023 at 6:51 AM, Runman said:

nothing?

I've never even seen or heard of one of those things.

Maybe try CNC Zone  ( https://www.cnczone.com/forums/ ) or Practical Machinist ( https://www.practicalmachinist.com/forum/ ).