can not generate g code for all operations

[RTC]

(In MasterCam 2022)

Need help please,

When generating G-Codes, the post processor does not generate all selected operations, only the last one.

I changed the NC name and still get the same issue.

[#Rekd™]

After selecting all the operations, right click -Edit Selected Operations - Change NC File Name - Rename your file.

[gcode]

I could be wrong, but I don't think you can post with the educational version of Mastercam,

[AHarrison1]

4 minutes ago, gcode said:

I could be wrong, but I don't think you can post with the educational version of Mastercam,

You are correct there sir.

[#Rekd™]

1 hour ago, gcode said:

I could be wrong, but I don't think you can post with the educational version of Mastercam,

If it is a licensed educational version you can post (mine is an educational license). Home Learning edition can not post, both use .emcam extensions.

[Compaq007]

I thought that for any educational versions of Mastercam, you can't post or export anything. Is that right? 

[#Rekd™]

12 hours ago, Compaq007 said:

I thought that for any educational versions of Mastercam, you can't post or export anything. Is that right?

HLE or Home Learning Edition has these restrictions (can not post, can not export etc)

Educational versions (paid license) have full access to posting, exporting etc. Your license has to include the products that you are working with (Lathe, Mill, Multi-Axis etc).