Undercuts not available!

[ESHIREY]

Trying to use multiaxis pocket with undercuts, however, this is not allowing me to choose. Anyone know what parameters I can choose to have the option of undercuts. 

 

[Aaron Eberhard]

Undercuts only work when set to Offset instead of Dynamic Type, however, it looks like in 2024 it doesn't enable it at all.   Looks like a bug to me?   I'd report it to [email protected] with your file.

[crazy^millman]

That toolpath doesn't support undercuts that I am aware of. Do everything but the undercut areas then come with Unified to do those sections. A sample file would be best so someone can teach you a way to get it done.

 

FYI for all those that might read this thread. The biggest reason I ask for files is to help teach others. I just shared the over 500 different files I have in my Dropbox to students I have been teaching lately. They loved it. #2 is to see if your a legit user of the software.

[Aaron Eberhard]

12 minutes ago, crazy^millman said:

That toolpath doesn't support undercuts that I am aware of. Do everything but the undercut areas then come with Unified to do those sections. A sample file would be best so someone can teach you a way to get it done.

 

FYI for all those that might read this thread. The biggest reason I ask for files is to help teach others. I just shared the over 500 different files I have in my Dropbox to students I have been teaching lately. They loved it. #2 is to see if your a legit user of the software.

It is supposed to, as long as you use the offset pattern type.   It looks like it's not being enabled correctly?  It does in 2022, at least (I had that opened already, so I checked there :)).

[bird2010]

11 hours ago, Aaron Eberhard said:

Undercuts only work when set to Offset instead of Dynamic Type, however, it looks like in 2024 it doesn't enable it at all.   Looks like a bug to me?   I'd report it to [email protected] with your file.

Hi Aaron...
2024....I don’t have time to switch to English ...sorry!

[Aaron Eberhard]

7 hours ago, bird2010 said:

Hi Aaron...
2024....I don’t have time to switch to English ...sorry!

Ah, gotcha, thanks Bird! 

Unchecking Check Against In Process Stock (on the Collision control page).