sample parts for X

[Greg McKay]

I am working on creating sample parts for X.

 

I am creating parts that show different toolpath functions in Mastercam

 

We would also like to include parts from users.(real parts)

 

If you have a part that would make a good sample part send it up.

 

Also if you would like to see more samples of a function, let me know.

 

Thanks,

[Brent Wilkerson]

Prepare to be flooded, I bet....

[Shawn Wentzel- Wenteq Inc]

It would be nice to have a seperate profile for a thread mill and then you could verify and see the threads getting cut instead of using an end mill.

[Guest CNC Apps Guy 1]

So draw one and save it. It's what I did. :shrug:

[Mike Mattera - TFM]

What's a matter Greg! The worlds not sending you enough part files to look at ?

 

Mike Mattera

[cadcam]

Greg do you want them drawn in X

Or can they be done in MC9?

[Mick]

A few examples of rotary axis work, as in anything from axis substitution through to full simultaneous would be great. Especially A axis.

 

That was something I had to pretty self teach myself, except for the assitance of some great people on this forum.

 

Cheers

[Greg McKay]

MC9 files are fine

 

Mike,

 

When I look at the parts that people send, that I like, It is obvious that they are proprietary.

 

and

 

It's rare that someone sends a part to Support because, the toolpath is perfect.

 

Greg

[cadcam]

Greg there is such a thing as a perfect toolpath?

[JAMMAN]

Define "send it up" please. I got a doozie for ya.

[Greg McKay]

Thanks everyone for the parts sent so far.

 

You can email parts to my email address or to [email protected] Attention Mark B.