MuR0904......I think I did it

[somename75]

Thanks michael

 

[Thad]

Thanks Mike!

 

Thad

[Mike Whitten CAD/CAM Contractors]

Your welcome guys.

 

I just sent an e-mail to CNC asking for the rest of the data.

 

Thanks

[Mike Whitten CAD/CAM Contractors]

Here is the documentation on the remaining bug numbers:

 

 

620 Curve 5 axis points added by the point generator are being "comped"

to the surface. need to check the "on projected curve" flag and not comp

if running on the curve.

1337 Toolpaths, MultiAxis - Reference Points used for approach and

retract do not work.

2445 Curve 5 axis - toolpath incorrect with Depth cut button in the

Multi axis parameter tab is checked

2867 Flow 5axis - The initial rapid position is wrong. This error only

occurs when check surfaces removed it the initial portion of the tool

path.

3101 Drill 5ax - will not tip comp to surface when selecting one point.

Works fine with multiple points

3589 Curve 5ax - Array for lines was limited to 250 lines - now will be

allocated dynamically.

3797 multiaxis toolpath - chaining multiple contours does not maintain

chain direction

4774 multiaxis toolpath - If I turn on the gouge check for the toolpath

it exits Mastercam when you try to regen the path.

4873 Curve5ax - BBad tool vector when crossing over the seam of the

surface.

24579 multiaxis toolpath - WCS is not affecting the rapid position in

the G1002 line.

 

 

Mike

[Mike Whitten CAD/CAM Contractors]

FYI,

 

Have a look at the Check Holder chook(ckholder.dll)and the help file. It is still in the developmental stages but looks like it is working for quite a bit of stuff already. They are going to add holder libraries later etc. It will do stuff like break up the nci into separate ops with different tool lengths.

 

This is what I have been waiting for!

 

CNC Software Rocks!

 

Mike

[Tom Dorgan from American Precision]

Has anyone experienced an increase in crashing after loading the September Maintenance ??? Mine kept bombing in verify screen on large files after I updated and went away when I uninstalled it.

[Mike Whitten CAD/CAM Contractors]

I have not had any problems yet but I have only loaded recently. If I get issues I will post.

 

Thanks

[Storkman]

no problems here.