solidworks 2005

[Lathe-Mill]

Hello peeps, we just upgraded to solidworks 2005,

I send an e-mail to CNC support team asking about the converter for it, does anyone here got the converter yet?. thanx

[Hardmill]

Check the Mastercam site, I don't even know if

its out yet.

 

Did you get your Ram logo taken care of???

 

PEACE

[Lathe-Mill]

I did check the site and is nothing there yet, about the ram logo, i have a couple, i will like to have some more so i decide wich is better,do u have one? thanx.

[Hardmill]

I convert one this afternoon and get it over to you.

 

 

PEACE

[Lathe-Mill]

thanx

[Dennis at CAD/CAM Consulting]

I was told on 10-6 that the SW2005 translator is in the works. Written but waiting for QC approval. Hopefully a patch/app soon.

[Rekd™]

bump

[MACHINEMASTERG]

quote:

---

Beta 4 of Mastercam X is what's up. Once that releases, the SW 2005 converter is next up for release - it's already been mostly tested and approved so the tentative release date is Nov 8. It will be available from dealers at that time and about a week later directly from the website

-----Original Message-----

From: Greg Emmons [mailto:[email protected]]

Sent: Wednesday, October 27, 2004 12:17 PM

To: QC Inbox

Subject: sw2005 to mcam v9.1sp2 ???

 

 

ive been waiting for a chook or a patch to allow direct convertion of sw2005 sldprt files into mcam how much longer till this is out i was told last mounth the begining of october were now into november almost whats up???

 

 

---

heres the replie i got a few weeks ago from QC

[Lathe-Mill]

I feel you there machinemasterg

[cadcam]

It's coming and it works I have tested it all ready.

Just hang in there.

[jimp]

Iam using SW2005 and Mastercam Direct opens Mastercam with Part have to click

(Feature-Less 'Brick') and it brings the partin to Mastercam fine.

 

JimP