set up sheets?

[mr.miyagi]

can anybody explain how to use the html set up sheets?

[Joeyls319]

Degmc

Can they be customized to fit specific needs?

 

Joey

[connormac]

If you don't mind ne asking, which two files???

[Müřlıń®]

HTML.set must be in the same dir as your post.

 

There is a readme file that unzipps.

 

Crazy Millman has a short and sweet HTML.set on the ftp site you can download. Some others do also.

 

 

quote:

---

Can they be customized to fit specific needs

---

If you know HTML launguage you can adjust the output of the free one or use someone elses on the FTP.

 

For a fee, someone here will customize it for you if you need it.

[DavidB]

Guys,

I dowloaded some of the .set files from the FTP site Crazy millmans and Code_breakers.

When I make a setup sheet there are little boxes with red crosses threw them where pics should be.How do I get the pics into the setup sheet?

The other thing I noticed was the cycle time it caculates.I used three different .set files on the same job one said 6hrs 22min the other said 1hr 54min and another 22min?

 

Crazy,

In your setup sheet it has...

[c:mcam9millncmmc0397.gif not found]

Create image if desired and regenerate Setup Sheet.

Can you explane this Thanks

 

Thanks

[crazy^millman]

Well these are images that came with the orignal download avaialbe for free. The icons that show up on the print out all have to come from some hwere so this is the plcae they need to be and would be if you had the free download. I changed soem things to be shorter but never go the max-min thing figured out I think code breker or razzer did and their set-up sheet is better in the fact that it does do this where as the one I worked on I could never get ot work. I still have not got a good grasp on buffers though everyone says they are easy I just do not see it guess part of it is just really never have the time anymore to do things liek this anymore. I left my last job hoping to have it eaiser to only have it just as much if not more responsiblity than I did before not complaing just explaining my lack of time. The only thing I can say is spring for the money and tell Dave what you are looking for and I am 100% sure he will take care of you. I was going in the route of a EXCEL VB but that seem to have hit the brick wall of life as well. There is a Word VB there that is very nice and John Thompson did it. Take a look at this does a good job.

 

So day Matt aka REKD was going to make his kick arse one avaialbe but no luck there yet guy could be rich. so good luck and think about Dave's untill Rekd unleases his on the world then we will all have it real easy.