Job opportunity

[Camdude®]

Gentlemen,

here at Greene Tweed & Company, Inc. we are searching for a CAM programmer. Must be well versed in Mastercam Mill 2.5 to 5 axis, Lathe with live tooling, a strong command of GT&D. Solidworks a plus. Looking for 5 years experience.

We are heavily into composites so experience in that field is highly desirable. Our man focus

is Boi-med, Fliud Handling, Aroespace & semiconductor. We don't make widgets, all of our work is mission critical, failure is not an option as our parts go into landing gears, airflight controls, medical components, oil field apps. Tolerances are typically tight (±.0001 ).It's challenging work but i learn something new everyday.

 

If you are interested please contact:

 

Amanda Fick

H.R. Generalist

2075 Detwiler rd.

P.O. Box 305

Kulpsville PA. 19443

tel: 215-256-9521 ext 1039

email: [email protected]

 

p.s. Webby , if this is not the place to post this please remove.

[mcpgmr]

My resume is on the way ! Thanks !

[MACHINEMASTERG]

there you go paul!!! and if your lucky you get to work with PHIL

[CAM-mando]

Paul, I was thinking of you when I saw this post this morning.

 

Good Man there Phil

[Gorn]

Guess I can't apply because of my weak Mastercam training.

 

 

Fred Mitchell

[Camdude®]

Ouch Fred,

i was sure you guys were taking notes,

must of been playing tic-tac-toe.

[DC Gorn]

LOL: just a dig at my Teacher.

 

Belated congats on the new gig.

[deeherk]

if i had all that experience, i sure wouldn't be here...

dan

[Jack Mitchell]

quote:

---

Guess I can't apply because of my weak Mastercam training....Fred Mitchell

---

Fred, you get your butt in there and slug it out.

Scheesh, you're making me look bad in here.

 

 

Regards, Jack

[DC Gorn]

Jack,

It was a inside joke. When I started with Mastercam in 98 Phil was my teacher. Lath/Mill, 3D, Solids, 5 axis and Post training Plus a good bit a tech support. If it was closer I would apply just cause working with Phil would be a blast.

[5 AX]

Hey phil congrats on the new job!

Out of curiosity how long of a commute is it from lancaster?

[Camdude®]

5ax,

it's about an hour to 1.25 probably.

depends on start time. they are flexible here because we run 3 shifts. but how far it is from Quadalawhothehellcares i have no idea.

[mcpgmr]

still open ?

[Camdude®]

Paul, yes it is still open.

HR takes abit of time with the resumes first

bsfore calling the people in.

hang loose you should here from us soon.

[Rekd™]

quote:

---

all of our work is mission critical, failure is not an option as our parts go into landing gears, airflight controls, medical components, oil field apps.

---

Some of the stuff I make is made in case some of your stuff goes terribly wrong and needs to be destroyed before it hits the ground...

[Camdude®]

Matt,

when is the new one due,

 

BTW, i'm jealous of

Chantz, he's got more toys than i do.

 

congrats, hope all is well with mom and future

son/daughter.

[CAM-mando]

quote:

---

Some of the stuff I make is made in case some of your stuff goes terribly wrong and needs to be destroyed before it hits the ground...

---

Some of the stuff I make goes in an rescues people when both of you guys stuff doesn't work.

[mcpgmr]

[El Scotthead]

Hmm,

 

Kulpsville's a little to far from Harrisburg. Would you hold the position open until I get my pilot's license?