Editing the ncdatasheet HTML

[TK@PSG]

Is there a way for me to edit the html output from the ncdatasheet.dll? I would like to customize it a bit but am not sure where the dll is getting it's layout from.

[Bruce Caulley]

Have you tried using a template with the spreadsheet output? Tweak the template to what you want, save it in your chook folder and away you go.

 

HTH

 

Bruce

[TK@PSG]

How do I do that?

[Bruce Caulley]

Create an excel template called ncdatasheet.xlt and save it in your chook folder. Output the chook as a spreadsheet. All the data dumps onto the spreadsheet. You can then link whatever cells you like from where the chook outputs them to where you would like them on your setup sheet. Set your print area and print. I will email you an example.

 

Bruce

[betts]

Hey Bruce,

If you wouldn't mind, can I see that example also?

 

My .xls is a little weak, but I get there eventually. It would save me some time to see how others are doing it.

[Jody]

Bruce,

 

Could you plese email me the example also. I am curious to learn how to do more with the setup sheet.

 

thank you

Jody

[Tom Dorgan from American Precision]

Bruce, Maybe you should post that example on the FTP as I bet many would like to see it. I know I would. If not please email me a copy pretty please.

Thanks,,,,,,,,,,,TommyD

[Bruce Caulley]

Have a look at op1.xls undr setup sheets on the ftp. You will see that the info from the chook is dumped over to the extreme left. I just linked that information to where I wanted it.

 

HTH Bruce

[betts]

Thanks Bruce!

 

I will work on that when I have time, should help with automating the process.

[Alan Chen]

can I see that example also?

[Guest]

Alan,

 

quote:

---

Have a look at op1.xls undr setup sheets on the ftp.

---

If you click on the FTP link at the top of the page, it is still available on the FTP site.

[Zoober]

Here is a link to previous thread on X+.

linky

Check out the picks bout half way down.If this looks like something you want, I can give you some steps I took to create. Hint - It's all in the macros!

[MARK MA]

Bruce,

 

Could you plese email me the example also. I am curious to learn how to do more with the setup sheet.

 

thank you

Mark