Prototrak Post

[Nathan G. Baldwin]

I need a post for a prototrak VL 1840V lathe controller. Anybody Know where I can get one?

 

Thanks

[Nathan G. Baldwin]

Readers,

Please disregard this post. I am a new user and as such do not yet know the "faux pas" side of the forum. Perhaps adding a request within the Forum guidelines, which I read before posting my first post, would be helpful in preventing blunders like this one from giving new users, like myself, a bad reputation from the start.

In addition, Please excuse any overstepping of boundries found within this or any of my posts to date. In any of those possible cases, I can guarantee that my interests lie only in best serving Mastercam Customers. Especially in this particular case, wherein I had requested information on finding a post in order to help a client, as I am an employee of mastercam's Kentucky reseller, Eastech.

 

Again, My most humble appologies for the error.

It won't happen again.

 

Thanks

[MACHINEMASTERG]

welcome aboard nat

[Steve Biehl - Cimquest Inc]

Nathan,

the Reseller side of the forum would be a better place to ask for a post.

[Carl Vallance]

Nathan,

I wrote a post for the Protrak LX3 lathe about 4 years ago. It may work on the newer controls. Its on Jay's FTP site under Text and Post files. Mpltrak.zip. I shared this post along time ago. It is a protected post and can't be edited. If it will work for you, you're welcome to use it. If you need edits in it contact me by e-mail.

[Nathan G. Baldwin]

Thanks, fellas.

I found a post for an LX2 on our system here at E.T. , which should work. At least, I haven't heard anything from the customer. Thanks a million though, for the support. I really appreciate it.

 

[Thad]

Welcome aboard, Nathan!

 

Thad