Eastec, May 24 - 26

[Guest]

Eastec is coming up in a couple of weeks.

 

Right now it looks like I'll be attending on the 26th. We are actually taking our whole shop.

 

Anyone else planning on going?

[robk]

Going on the 25th. I'm trying to see if it's possible for the whole shop could go. Very busy in here...

[chris m]

I'm going to skip it this year [again] as I don't really have a reason to go; say 'hi' to Springfield for me

 

C

[Steve Biehl - Cimquest Inc]

Mastercam has moved their booth. They are now in building 1 Booth 1126. We will be in building 5 Booth 5152. Come and see us at both booths.

[Threept82]

Going to stop in one of the days. Its only 10-15 min. from the shop.

[KMaynard]

We are supposed to be there..although I am not aware of which day yet ..

[P_Scott]

jmparis,

 

As Steve said in his earlier reply, we'll be there in bldg #5, booth #5152. Mastercam used to be in the same spot in previous years at Eastec but they've moved their corporate booth to bldg #1. In the past I've been strictly in the Mastercam corp. booth demonstrating the software. Steve has usually bounced back and forth between the Mastercam booth and the booth we staffed which was sponsored by Cimco. I'm not sure exactly how we'll work things this Eastec but come on down and say hello. You'll be sure to find one of us in either booth this year. Looking forward to it.

[LaszloK]

I think I'll do my normal visit on the 25th. I find wednesday to be the best day, except it is usually the busy day at the show. The last few years it has taken all day just to stroll past every vendor in every building. I usually go even when I do not have a need just to stay networked with the vendors. Have fun

[MCFELIX]

I going to 25 eastec .will se you there maybe i have chance to see if version x is ready.

[jimspac]

I plan on going one of the days, not sure which one. Look forward to seeing Peter and Steve from S4A again.

[Guest]

Just found out, going on the 25th.