McamX Training.Tmp?

[stevieboy]

Hi All

 

Question... I found on the cadcam's FTP Site a training file called McamX training .Tmp

Does anyone know anything about it?

And how do you open a Tmp file?

 

Thanks again

 

Also I tried to open the Harley Davidson file,

when it opens up in Mcam, it comes up, but so does the hour glass, hour glass stays on and locks up my computer, causing me to do a hard boot.

[Mike Mattera - TFM]

The hour glass may not be a lock up. Might just be a HUGE file with a billion surfaces. I dont know for sure, but I've seen that happen. Open the file and go to lunch (or home).

 

Mike Mattera

[Brendan P]

Change the file extension from .tmp to .exe

 

the hd thing has done this to a lot of people inc. myself.

forget that file!

[stevieboy]

Thanks Guys

I'll give it a shot, But as far as a huge file it my be, The hour glass came up about 4:55 pm

and I left for home, this morning at 6:00 am

the hour glass was still running, so I did a hard boot.

 

The McamX training file, I'm hoping I can get a head start on X

 

stevieboy

[Philcott]

Stevieboy,

 

I had troubles with one of the harley files as well. It was a while ago though. If I remember correctly it would open but if I turned on all levels I froze up.

 

Phil

[stevieboy]

Thanks Phil

 

P.s. NICE FISH!

 

stevieboy

[DaveR]

I renamed it .exe, but I can't get anything to open it. What program opens this file?

[Todd Tracey from Fastech]

A tmp file is typically a "Temporary" file thus the tmp extension. You probably can't open it with anything and get anything useful from it.

[Dan Kintzel]

If you rename it, it is a very helpful file. Rename the extension, not the whole file name.

 

This training set of vids are old news when it comes to "X". Several Beta versions behind. It should be pulled from the FTP.

[DaveR]

DK I did rename the extension. So what program opens this file?

 

BTW that sig line vid is in pretty bad taste.

[Dan Kintzel]

It is it's own executable file. Just open it. Nothig needed.

 

BTW. removed sig line - I didn't put it there. someone is screwing around

[SHEP]

quote "BTW that sig line vid is in pretty bad taste."

 

I'll say, the birds wings look like hands.

[Philcott]

I haven't seen the sig line vid. point me to it?

 

Phil

[dhaniel]

Hi All:

 

Don´t worry about this file becouse you just have to change the extension but it doesn´t an executable file, is a simple change to zip file, yes, you only have to change .tpm by .zip, .iso, .rar, ETC and then just enjoy it becouse it´s really great!!!!

 

you can change the file extension with "total commander" it´s very useful program. and then you can open it with winrar program.

 

that´s all my friends enjoy it

regards!!

 

dhaniel

[Steel Surgeon]

The zip size is 60Megs and on my cable took 1 hr approx.

[Guest]

60 megs took an hour, on cable?

 

WOW, something don't seem right about that. Did you download that during peak usage hours?

 

I am on cable and can do 60 megs in about 10 minutes, less sometimes.

[Steel Surgeon]

I usually check my speeds at 3Meg at various speed test sites, but its probably the server that is limiting my speed.

 

quote:

---

Speed

3 megabits per second

 

Communications 3 megabits per second

Storage 367.8 kilobytes per second

1MB file download 2.8 seconds

Subjective rating Awesome

 

Explain results

 

 

Info

Date & time Sunday, June 5, 8:20AM*

Test type IDT4 Free

Connection type Cable

Region Michigan

Data size 1024KB

 

---

[Guest]

I would think if you were downloading that file while other people were also downloading files that your speed would be limited. But I just downloaded a 63.3 meg file in 18:02.

 

Now, I would suspect at this time of the morning there is no one else doing anything of substance of the FTP server.

 

It's either that or there is a router bottleneck somewhere between your node and Jays server.

 

I ran a test on my connection also, I received quite similiar results, just slighly improved over yours. Same site I assume, bandwidthplace.com.

 

BTW sorry for the hijack guys

 

[ 06-05-2005, 09:14 AM: Message edited by: jmparis ]

[Steel Surgeon]

Yes Bandwidthplace.com

 

I just d/l a file from the ftp at 93kb/s and then went to Cnet and d/l a file at 565kb/s.

 

 

Looks like the "McamX training .Tmp " file is gone now. I hope we can get a few more peeks at the interface.

 

BTW I am also sorry for the hijack guys.

[cadcam]

Well you guys are learning that it matters on the servers bandwith has alott 2 do with it.

 

I do not have a T1 to T3 setup as it is to expensve for just me alone.

 

I have 5meg down and 768 up so you know.

[Guest]

I used to run a server Jay.

 

I am well aware of it

 

[cadcam]

Cool Jhon.