X - toolpath display

[ChuckK]

I opened an MC9 file in X and when it came up it was displaying all the tool paths. I hit F3 to refresh the display and they didn't go away. I have looked every where (except the right place) to figure out how to turn them off. Any help would be appreciated.

 

Thanks

[Jeff Kemper]

Alt-T

[ChuckK]

Thanks

[gcode]

Also

 

from the OPs Manager

 

Select All and click the symbol with little blue waving lines.

You can turn toolpath display off or on for any

selected operations

[Jeff Kemper]

Chuck

 

Your welcome. Welcome to the forum!

[Jaz]

Also can go to Settings...Configuration...Toolpaths and unmark "Repaint toolpath" to keep it that way. (Alt-F8 is keys to edit System Configuration)