Warning- Boundry does not lie within the construction plane

[ILv2Rk]

My program was fine when I posted it and saved it. Now I have reopened it to make some changes and repost and this stupid message comes up.

 

Any ideas?

Jeff

[ILv2Rk]

Or how about this one.

 

 

"Negative stock magnitude cannot exceed the tool corner radius"

 

[Thad]

For the construction plane issue, try selecting the Cplane again and regen. In V9, the Cplane would get lost and you had to click the icon at the top of the screen. The left side menu wouldn't do it.

 

As far as the negative stock goes, you can't cut negative stock that is more than the corner radius of the tool. I guess the error message kinda says that.

 

Thad

[Joels]

I get this message and i restart mastercam then it works

[crazy^millman]

I get that one all the time. Most times I am forced to xform project the geometry to the exact same place it is and it fixs this problem. Really sucks when you got 90+ operations though.

[Mike Mattera - TFM]

You should be able to cut neg. stock in X. One of the new features. The other plane problem is a problem. Happens for no reason. I was neverable to fix it.

 

Mike Mattera

[ILv2Rk]

Hey guys,

 

Came in today and opened the same file w/o doing anything to it. and everything is fine.

 

So thanks Joels, I guess by closing Mastercam and reopening it, this just reset everything and it works.

 

Anyways, Problem solved.

Jeff