MR1 sp2 Crashing

[DavidB]

Lathe stock advance now crashes MC every single time in Backplot.

[Guest]

Send that puppy off to QC David.

[DavidB]

Done

[DavidB]

Also anyone noticed backplot you hit S it steps once then stops hitting S does nothing, I have to click the graphics screen again then hit S to continue.

 

In ops manager Hit the group of toolpaths they all have a green tick meaning there selected. Now with CTRL button you should be able to unselect a Toolpath.

 

I need to do this to to unselect the Stock advance toolpath as it crashes MC everytime.

Now I have to select each toolpath with CTRL

[Bruce Caulley]

Hey David, drop me a line and we will organise a couple of coldies while you are up.

 

Bruce

[?Mark]

Yea, David

Backplot issues have been talked about here

hth

[Thad]

David,

 

Control key in toolpath manager bug talked about here.

 

Thad

[?Mark]

Thad has it under control

[DavidB]

The Tailstock will backplot fine but will not in Verify.

 

There are 7 new toolpaths in Mill.

It seems Lathe is being left behind.

I have a second seat of MC which is Lathe only so the shop floor can do the simple stuff. We pay Maintanence on this Lathe seat too and what are we getting?

 

The whole X trasition is wearing very thin.

[DavidB]

Bruce, flying up Nth tonight.

I'll take you up on the coldie

[Thad]

quote:

---

Thad has it under control

---

 

Thad teh undercover beta tester

[tryon]

quote:

---

We pay Maintanence on this Lathe seat too and what are we getting?

---

umm Translators? Until matss comes out, i guess we are just prepaying for later.

[DavidB]

Opening files created in a non MR1 system that worked fine CRASH a MR1 system everytime in Backplot

 

ProE Manufacturing is looking good