.gif convert

[DavidB]

Would some on e be able to convert a .gif for me so I can get it into MC. It's in the All pics folder on the FTP site called KTM_logo.gif

 

Thanks in advance

[BernieT]

Hi David

 

Look in All Pics for KTM logo.igs

 

I just traced it in Rhino3D.

 

[Hardmill]

Take a look at bernies and if ya need I can do in MC for

you in a little while.

Just e-mail me if you need to.

 

 

PEACE

[DavidB]

Thank you

[DavidB]

Bernie,

I opened your .igs file and its has no entities in MC?

[BernieT]

Strange, worked for me.....

 

I'll put it up in MC9.

[3rdstring]

I was able to read the IGS file no prob.

[BernieT]

Try again, David.

 

[DavidB]

Bernie,

I opened your file thanks.

This is inetresting your file which you say was done in Rhino is very different than a file I got from Mastercams Raster/vecter translater. Emailed from Robert Ouellette thanks

 

I put the Mastercam Raster file on the FTP site as KTM (2).

The mastercam file is much cleaner and is different in size.The Rhino file has cut corners of the letters.

 

Thanks

[BernieT]

Hi David,

 

The size difference doesn't suprise me, when I brought it into Rhino I didn't make it any certain size, I figured you would scale it as needed.

 

The cut corners are my fault, I zoomed way in and traced rather fast. I guess I didn't think those corners were that important.

 

I'm happy you got what you needed.